Veritas NetBackup™ Appliance Commands Reference Guide

Last Published:
Product(s): Appliances (4.1)
Platform: NetBackup Appliance OS
  1. Overview
    1.  
      About the NetBackup Appliance Shell Menu
    2. Logging in to the NetBackup Appliance Shell Menu
      1.  
        Command limitations on appliances that are not configured
    3.  
      Using the NetBackup Appliance Shell Menu
    4. About the NetBackup Appliance Shell Menu command views
      1.  
        About the commands under the Appliance view
      2.  
        About the commands under the Manage view
      3.  
        About the commands under the Monitor view
      4.  
        About the commands under the Network view
      5.  
        About the commands under the Reports view
      6.  
        About the commands under the Settings view
      7.  
        About the commands under the Support view
  2. Appendix A. Main > Appliance commands
    1.  
      Appliance > Primary
    2.  
      Appliance > Media
    3.  
      Appliance > Management
    4.  
      Appliance > Remove
    5.  
      Appliance > ShowDedupPassword
    6.  
      Appliance > ShowIdentity
    7.  
      Appliance > Status
  3. Appendix B. Main > Manage > FibreChannel commands
    1.  
      Manage > FibreChannel > Clean
    2.  
      Manage > FibreChannel > Configure
    3.  
      Manage > FibreChannel > Reset
    4.  
      Manage > FibreChannel > Scan
    5.  
      Manage > FibreChannel > Show
    6.  
      Manage > FibreChannel > Statistics
  4. Appendix C. Main > Manage > HighAvailability commands
    1.  
      Manage > HighAvailability > AddNode
    2.  
      Manage > HighAvailability > GetAssetTag
    3.  
      Manage > HighAvailability > RemoveNode
    4.  
      Manage > HighAvailability > Setup
    5.  
      Manage > HighAvailability > Status
    6.  
      Manage > HighAvailability > Switchover
  5. Appendix D. Main > Manage > Libraries commands
    1.  
      Manage > Libraries > Configure
    2.  
      Manage > Libraries > Deny
    3.  
      Manage > Libraries > Down
    4.  
      Manage > Libraries > Inventory
    5.  
      Manage > Libraries > List
    6.  
      Manage > Libraries > Requests
    7.  
      Manage > Libraries > Reset
    8.  
      Manage > Libraries > Resubmit
    9.  
      Manage > Libraries > Up
  6. Appendix E. Main > Manage > Libraries > Advanced > ACS commands
    1.  
      Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
    2.  
      Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
    3.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
    4.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
    5.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
    6.  
      Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
    7.  
      Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
    8.  
      Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
    9.  
      Manage > Libraries > Advanced > ACS > TestACS
    10.  
      Manage > Libraries > Advanced > ACS > ViewVMconf
  7. Appendix F. Main > Manage > License commands
    1.  
      Manage > License > Add
    2.  
      Manage > License > List
    3.  
      Manage > License > ListInfo
    4.  
      Manage > License > Remove
  8. Appendix G. Main > Manage > MountPoints commands
    1.  
      Manage > MountPoints > List
    2.  
      Manage > MountPoints > Mount
    3.  
      Manage > MountPoints > Unmount
  9. Appendix H. Main > Manage > NetBackup CLI commands
    1.  
      Manage > NetBackupCLI > Create
    2.  
      Manage > NetBackupCLI > Delete
    3.  
      Manage > NetBackupCLI > List
  10. Appendix I. Main > Manage > OpenStorage commands
    1.  
      Manage > OpenStorage > Install
    2.  
      Manage > OpenStorage > List
    3.  
      Manage > OpenStorage > Readme
    4.  
      Manage > OpenStorage > Share
    5.  
      Manage > OpenStorage > Uninstall
  11. Appendix J. Main > Manage > Software commands
    1.  
      Manage > Software > Cancel
    2.  
      Manage > Software > Delete
    3.  
      Manage > Software > Download
    4.  
      Manage > Software > DownloadAnalyzer
    5.  
      Manage > Software > DownloadProgress
    6.  
      Manage > Software > Firmware
    7.  
      Manage > Software > Install
    8.  
      Manage > Software > List
    9.  
      Manage > Software > Readme
    10.  
      Manage > Software > Rollback
    11.  
      Manage > Software > Share
    12.  
      Manage > Software > UpgradeStatus
    13.  
      Manage > Software > VxUpdate
  12. Appendix K. Main > Manage > Storage commands
    1.  
      Manage > Storage > Add
    2.  
      Manage > Storage > Create
    3.  
      Manage > Storage > Delete
    4.  
      Manage > Storage > Edit
    5.  
      Manage > Storage > Monitor
    6.  
      Manage > Storage > Move
    7.  
      Manage > Storage > Remove
    8.  
      Manage > Storage > Resize
    9.  
      Manage > Storage > Scan
    10.  
      Manage > Storage > Show
    11.  
      Manage > Storage > Erase
  13. Appendix L. Main > Manage > Tapes commands
    1.  
      Manage > Tapes > Cleaning
    2.  
      Manage > Tapes > Delete
    3.  
      Manage > Tapes > Eject
    4.  
      Manage > Tapes > Freeze
    5.  
      Manage > Tapes > Inventory
    6.  
      Manage > Tapes > List
    7.  
      Manage > Tapes > ListNetBackupMedia
    8.  
      Manage > Tapes > Suspend
    9.  
      Manage > Tapes > Unfreeze
    10.  
      Manage > Tapes > Unsuspend
  14. Appendix M. Main > Manage > Certificates commands
    1.  
      Manage > Certificates > Generate
    2.  
      Manage > Certificates > Delete
  15. Appendix N. Main > Monitor commands
    1.  
      Monitor > Beacon
    2.  
      Monitor > MemoryStatus
    3.  
      Monitor > NetBackup
    4.  
      Monitor > NetworkStatus
    5.  
      Monitor > SDCS
    6.  
      Monitor > Top
    7.  
      Monitor > Uptime
    8.  
      Monitor > Who
    9.  
      Monitor > Hardware
  16. Appendix O. Main > Network commands
    1.  
      Network > Configure
    2.  
      Network > Date
    3.  
      Network > DNS
    4.  
      Network > Gateway
    5.  
      Network > Hostname
    6.  
      Network > Hosts
    7.  
      Network > IPv4
    8.  
      Network > IPv6
    9.  
      Network > LinkAggregation
    10.  
      Network > NetStat
    11.  
      Network > NTPServer
    12.  
      Network > Ping
    13.  
      Network > SetProperty
    14.  
      Network > Show
    15.  
      Network > TimeZone
    16.  
      Network > TraceRoute
    17.  
      Network > Unconfigure
    18.  
      Network > VLAN
    19.  
      Network > WANOptimization
  17. Appendix P. Main > Network > Security commands (IPsec)
    1.  
      Network > Security > Configure
    2.  
      Network > Security > Delete
    3.  
      Network > Security > Export
    4.  
      Network > Security > Import
    5.  
      Network > Security > Provision
    6.  
      Network > Security > Refresh
    7.  
      Network > Security > Show
    8.  
      Network > Security > Unconfigure
  18. Appendix Q. Main > Reports commands
    1.  
      Reports > Deduplication
    2.  
      Reports > Process
  19. Appendix R. Main > Settings commands
    1.  
      Settings > Deduplication
    2.  
      Settings > FibreTransport
    3.  
      Settings > iSCSI > Initiator
    4.  
      Settings > iSCSI > Interface
    5.  
      Settings > iSCSI > Target
    6.  
      Settings > LogForwarding
    7.  
      Settings > LifeCycle
    8.  
      Settings > NetBackup
    9.  
      Settings > NetBackup DNAT
    10.  
      Settings > NetBackup NATServers
    11.  
      Settings > Password
    12.  
      Settings > Share
    13.  
      Settings > SNMP polling
    14.  
      Settings > Sysctl
    15.  
      Settings > SystemLocale
  20. Appendix S. Main > Settings > Alerts commands
    1.  
      Settings > Alerts > CallHome
    2.  
      Settings > Alerts > Email
    3.  
      Settings > Alerts > Hardware
    4.  
      Settings > Alerts > SNMP
  21. Appendix T. Main > Settings > Notifications view commands
    1.  
      Settings > Notifications > LoginBanner
  22. Appendix U. Main > Settings > Security commands
    1.  
      Settings > Security > Authorization
    2.  
      Settings > Security > Authentication > AccountStatus
    3.  
      Settings > Security > Authentication > ActiveDirectory
    4.  
      Main > Settings > Security > Authentication > CIFSShare
    5.  
      Settings > Security > Authentication > Kerberos
    6.  
      Settings > Security > Authentication > LDAP
    7.  
      Settings > Security > Authentication > LocalUser
    8.  
      Main > Settings > Security > Certificate
    9.  
      Main > Settings > Security > Certificate > CertificateSigningRequest
    10.  
      Main > Settings > Security > FIPS
    11.  
      Main > Settings > Security > Ports
    12.  
      Main > Settings > Security > STIG
    13.  
      Main > Settings > Security > SecurityLevel
  23. Appendix V. Main > Support commands
    1.  
      Support > Checkpoint
    2.  
      Support > Cleanup > CleanMonInvData
    3.  
      Support > Cleanup > RemoveShelfEntries
    4.  
      Support > Cleanup > ResetDIMMErrors
    5.  
      Support > Collect
    6.  
      Support > DataCollect
    7.  
      Support > Disk
    8.  
      Support > Errors
    9.  
      Support > FactoryReset
    10.  
      Support > FibreTransport
    11.  
      Support > InfraServices
    12.  
      Support > InstantAccess
    13.  
      Support > iostat
    14.  
      Support > IPMI
    15.  
      Support > KillRemoteCall
    16.  
      Support > LogBrowser
    17.  
      Support > Logs
    18.  
      Support > Maintenance
    19.  
      Support > Messages
    20.  
      Support > NBDNA
    21.  
      Support > nbperfchk
    22.  
      Support > NBSU
    23.  
      Support > Processes
    24.  
      Support > RAID
    25.  
      Support > Reboot
    26.  
      Support > RecoverStorage
    27.  
      Support > Service
    28.  
      Support > ServiceAllowed
    29.  
      Support > ShelfOrdering
    30.  
      Support > Show
    31.  
      Support > Shutdown
    32.  
      Support > Storage ClearReservations
    33.  
      Support > Storage Reset
    34.  
      Support > Storage SanityCheck
    35.  
      Support > System
    36.  
      Support > Test

Name

Main > Monitor > Beacon — This command flashes or stops flashing lights on your appliance.

SYNOPSIS

Beacon Start

Beacon Stop

DESCRIPTION

The Beacon command enables you to flash the disk drive lights or to stop flashing the lights on the specified storage shelf (or enclosure) or hard disk drives of a 52xx appliance.

OPTIONS

Beacon Start Enclosure EnclosureID [Minutes]

Use this command to specify the amount of time to allow all disk drive lights of an enclosure to flash. Where EnclosureID is the device ID of the enclosure and [Minutes] is the duration of time that lights will flash. [Minutes] is an optional parameter. If you do not enter a value for this parameter, it takes the default value of 5 minutes.

Beacon Start HDD EnclosureID SlotNo [Minutes]

Use this command to specify the amount of time to allow a disk drive light to flash. Where EnclosureID is the device ID of the enclosure and SlotNo is the slot number of the disk. Instead of a slot number, you may also enter ALL to flash all disk drive lights. [Minutes] is the duration of time that lights will flash. [Minutes] is an optional parameter. If you do not enter a value for this parameter, it takes the default value of 5 minutes.

Beacon Start WWID [WWID] [Minutes]

Use this command to specify the amount of time to allow the disk drive lights of a storage unit to flash. Where WWID is the device ID of a specific disk group and [Minutes] is the duration of time that lights will flash. [Minutes] is an optional parameter. If you do not enter a value for this parameter, it takes the default value of 5 minutes.

Beacon Stop Enclosure EnclosureID

Use this command to stop flashing the lights of all the disk drives of an enclosure. Where EnclosureID is the device ID of the enclosure.

Beacon Stop HDD EnclosureID SlotNo

Use this command to stop flashing the light of a disk drive. Where EnclosureID is the device ID of the enclosure and SlotNo is the slot number of the disk or ALL.

Beacon Stop WWID [WWID]

Use this command to stop flashing the lights of the disk drives of an expansion unit. Where [WWID] is the device ID of the expansion unit. If you do not enter a value for this parameter, it displays a list of available expansion WWIDs.