Veritas NetBackup™ Appliance Commands Reference Guide

Last Published:
Product(s): Appliances (4.1)
Platform: NetBackup Appliance OS
  1. Overview
    1.  
      About the NetBackup Appliance Shell Menu
    2. Logging in to the NetBackup Appliance Shell Menu
      1.  
        Command limitations on appliances that are not configured
    3.  
      Using the NetBackup Appliance Shell Menu
    4. About the NetBackup Appliance Shell Menu command views
      1.  
        About the commands under the Appliance view
      2.  
        About the commands under the Manage view
      3.  
        About the commands under the Monitor view
      4.  
        About the commands under the Network view
      5.  
        About the commands under the Reports view
      6.  
        About the commands under the Settings view
      7.  
        About the commands under the Support view
  2. Appendix A. Main > Appliance commands
    1.  
      Appliance > Primary
    2.  
      Appliance > Media
    3.  
      Appliance > Management
    4.  
      Appliance > Remove
    5.  
      Appliance > ShowDedupPassword
    6.  
      Appliance > ShowIdentity
    7.  
      Appliance > Status
  3. Appendix B. Main > Manage > FibreChannel commands
    1.  
      Manage > FibreChannel > Clean
    2.  
      Manage > FibreChannel > Configure
    3.  
      Manage > FibreChannel > Reset
    4.  
      Manage > FibreChannel > Scan
    5.  
      Manage > FibreChannel > Show
    6.  
      Manage > FibreChannel > Statistics
  4. Appendix C. Main > Manage > HighAvailability commands
    1.  
      Manage > HighAvailability > AddNode
    2.  
      Manage > HighAvailability > GetAssetTag
    3.  
      Manage > HighAvailability > RemoveNode
    4.  
      Manage > HighAvailability > Setup
    5.  
      Manage > HighAvailability > Status
    6.  
      Manage > HighAvailability > Switchover
  5. Appendix D. Main > Manage > Libraries commands
    1.  
      Manage > Libraries > Configure
    2.  
      Manage > Libraries > Deny
    3.  
      Manage > Libraries > Down
    4.  
      Manage > Libraries > Inventory
    5.  
      Manage > Libraries > List
    6.  
      Manage > Libraries > Requests
    7.  
      Manage > Libraries > Reset
    8.  
      Manage > Libraries > Resubmit
    9.  
      Manage > Libraries > Up
  6. Appendix E. Main > Manage > Libraries > Advanced > ACS commands
    1.  
      Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
    2.  
      Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
    3.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
    4.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
    5.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
    6.  
      Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
    7.  
      Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
    8.  
      Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
    9.  
      Manage > Libraries > Advanced > ACS > TestACS
    10.  
      Manage > Libraries > Advanced > ACS > ViewVMconf
  7. Appendix F. Main > Manage > License commands
    1.  
      Manage > License > Add
    2.  
      Manage > License > List
    3.  
      Manage > License > ListInfo
    4.  
      Manage > License > Remove
  8. Appendix G. Main > Manage > MountPoints commands
    1.  
      Manage > MountPoints > List
    2.  
      Manage > MountPoints > Mount
    3.  
      Manage > MountPoints > Unmount
  9. Appendix H. Main > Manage > NetBackup CLI commands
    1.  
      Manage > NetBackupCLI > Create
    2.  
      Manage > NetBackupCLI > Delete
    3.  
      Manage > NetBackupCLI > List
  10. Appendix I. Main > Manage > OpenStorage commands
    1.  
      Manage > OpenStorage > Install
    2.  
      Manage > OpenStorage > List
    3.  
      Manage > OpenStorage > Readme
    4.  
      Manage > OpenStorage > Share
    5.  
      Manage > OpenStorage > Uninstall
  11. Appendix J. Main > Manage > Software commands
    1.  
      Manage > Software > Cancel
    2.  
      Manage > Software > Delete
    3.  
      Manage > Software > Download
    4.  
      Manage > Software > DownloadAnalyzer
    5.  
      Manage > Software > DownloadProgress
    6.  
      Manage > Software > Firmware
    7.  
      Manage > Software > Install
    8.  
      Manage > Software > List
    9.  
      Manage > Software > Readme
    10.  
      Manage > Software > Rollback
    11.  
      Manage > Software > Share
    12.  
      Manage > Software > UpgradeStatus
    13.  
      Manage > Software > VxUpdate
  12. Appendix K. Main > Manage > Storage commands
    1.  
      Manage > Storage > Add
    2.  
      Manage > Storage > Create
    3.  
      Manage > Storage > Delete
    4.  
      Manage > Storage > Edit
    5.  
      Manage > Storage > Monitor
    6.  
      Manage > Storage > Move
    7.  
      Manage > Storage > Remove
    8.  
      Manage > Storage > Resize
    9.  
      Manage > Storage > Scan
    10.  
      Manage > Storage > Show
    11.  
      Manage > Storage > Erase
  13. Appendix L. Main > Manage > Tapes commands
    1.  
      Manage > Tapes > Cleaning
    2.  
      Manage > Tapes > Delete
    3.  
      Manage > Tapes > Eject
    4.  
      Manage > Tapes > Freeze
    5.  
      Manage > Tapes > Inventory
    6.  
      Manage > Tapes > List
    7.  
      Manage > Tapes > ListNetBackupMedia
    8.  
      Manage > Tapes > Suspend
    9.  
      Manage > Tapes > Unfreeze
    10.  
      Manage > Tapes > Unsuspend
  14. Appendix M. Main > Manage > Certificates commands
    1.  
      Manage > Certificates > Generate
    2.  
      Manage > Certificates > Delete
  15. Appendix N. Main > Monitor commands
    1.  
      Monitor > Beacon
    2.  
      Monitor > MemoryStatus
    3.  
      Monitor > NetBackup
    4.  
      Monitor > NetworkStatus
    5.  
      Monitor > SDCS
    6.  
      Monitor > Top
    7.  
      Monitor > Uptime
    8.  
      Monitor > Who
    9.  
      Monitor > Hardware
  16. Appendix O. Main > Network commands
    1.  
      Network > Configure
    2.  
      Network > Date
    3.  
      Network > DNS
    4.  
      Network > Gateway
    5.  
      Network > Hostname
    6.  
      Network > Hosts
    7.  
      Network > IPv4
    8.  
      Network > IPv6
    9.  
      Network > LinkAggregation
    10.  
      Network > NetStat
    11.  
      Network > NTPServer
    12.  
      Network > Ping
    13.  
      Network > SetProperty
    14.  
      Network > Show
    15.  
      Network > TimeZone
    16.  
      Network > TraceRoute
    17.  
      Network > Unconfigure
    18.  
      Network > VLAN
    19.  
      Network > WANOptimization
  17. Appendix P. Main > Network > Security commands (IPsec)
    1.  
      Network > Security > Configure
    2.  
      Network > Security > Delete
    3.  
      Network > Security > Export
    4.  
      Network > Security > Import
    5.  
      Network > Security > Provision
    6.  
      Network > Security > Refresh
    7.  
      Network > Security > Show
    8.  
      Network > Security > Unconfigure
  18. Appendix Q. Main > Reports commands
    1.  
      Reports > Deduplication
    2.  
      Reports > Process
  19. Appendix R. Main > Settings commands
    1.  
      Settings > Deduplication
    2.  
      Settings > FibreTransport
    3.  
      Settings > iSCSI > Initiator
    4.  
      Settings > iSCSI > Interface
    5.  
      Settings > iSCSI > Target
    6.  
      Settings > LogForwarding
    7.  
      Settings > LifeCycle
    8.  
      Settings > NetBackup
    9.  
      Settings > NetBackup DNAT
    10.  
      Settings > NetBackup NATServers
    11.  
      Settings > Password
    12.  
      Settings > Share
    13.  
      Settings > SNMP polling
    14.  
      Settings > Sysctl
    15.  
      Settings > SystemLocale
  20. Appendix S. Main > Settings > Alerts commands
    1.  
      Settings > Alerts > CallHome
    2.  
      Settings > Alerts > Email
    3.  
      Settings > Alerts > Hardware
    4.  
      Settings > Alerts > SNMP
  21. Appendix T. Main > Settings > Notifications view commands
    1.  
      Settings > Notifications > LoginBanner
  22. Appendix U. Main > Settings > Security commands
    1.  
      Settings > Security > Authorization
    2.  
      Settings > Security > Authentication > AccountStatus
    3.  
      Settings > Security > Authentication > ActiveDirectory
    4.  
      Main > Settings > Security > Authentication > CIFSShare
    5.  
      Settings > Security > Authentication > Kerberos
    6.  
      Settings > Security > Authentication > LDAP
    7.  
      Settings > Security > Authentication > LocalUser
    8.  
      Main > Settings > Security > Certificate
    9.  
      Main > Settings > Security > Certificate > CertificateSigningRequest
    10.  
      Main > Settings > Security > FIPS
    11.  
      Main > Settings > Security > Ports
    12.  
      Main > Settings > Security > STIG
    13.  
      Main > Settings > Security > SecurityLevel
  23. Appendix V. Main > Support commands
    1.  
      Support > Checkpoint
    2.  
      Support > Cleanup > CleanMonInvData
    3.  
      Support > Cleanup > RemoveShelfEntries
    4.  
      Support > Cleanup > ResetDIMMErrors
    5.  
      Support > Collect
    6.  
      Support > DataCollect
    7.  
      Support > Disk
    8.  
      Support > Errors
    9.  
      Support > FactoryReset
    10.  
      Support > FibreTransport
    11.  
      Support > InfraServices
    12.  
      Support > InstantAccess
    13.  
      Support > iostat
    14.  
      Support > IPMI
    15.  
      Support > KillRemoteCall
    16.  
      Support > LogBrowser
    17.  
      Support > Logs
    18.  
      Support > Maintenance
    19.  
      Support > Messages
    20.  
      Support > NBDNA
    21.  
      Support > nbperfchk
    22.  
      Support > NBSU
    23.  
      Support > Processes
    24.  
      Support > RAID
    25.  
      Support > Reboot
    26.  
      Support > RecoverStorage
    27.  
      Support > Service
    28.  
      Support > ServiceAllowed
    29.  
      Support > ShelfOrdering
    30.  
      Support > Show
    31.  
      Support > Shutdown
    32.  
      Support > Storage ClearReservations
    33.  
      Support > Storage Reset
    34.  
      Support > Storage SanityCheck
    35.  
      Support > System
    36.  
      Support > Test

Name

Main > Manage > Storage > Show — View NetBackup storage information.

SYNOPSIS

Show ALL

Show Disk

Show Distribution

Show Partition [Info] [PartitionType] [Name]

DESCRIPTION

This command enables you to view the storage capacity and parameters of the storage devices and partitions within your appliance.

Note:

The Available and Used Size values displayed for the Media Sever Deduplication Pool (MSDP) partition on the Manage > Storage > Partitions page or by using the Manage > Storage > Show command on the NetBackup appliance may not be the full space available or used by the MSDP partition. This is because space is reserved by the file system and also by MSDP. The file system reserves space for its own use. In addition, MSDP reserves 4 percent of the storage space for the deduplication database and transaction logs.

Check the MSDP disk pool sizes from the NetBackup Administration Console to obtain the MSDP statistics.

OPTIONS

Show All

This command shows all of the storage information.

Show Disk

This command shows the storage disk ID, type, capacity, unallocated space, and status.

Show Distribution

This command shows the storage distribution of each partition on the disk.

Show Partition [Info] [PartitionType] [Name]

Shows the storage partition information. You can specify the following three options:

Parameter 1 - [Info]

Specifies whether to view the usage information, the disk pool and storage unit configuration, or to view both. The available options are ALL, Configuration, and Usage. The default value is ALL.

Parameter 2 - [PartitionType]

Specifies the partition type. The available options are ALL, AdvancedDisk, Configuration, MSDP, MSDPCatalog, Share. The default value is ALL.

Parameter 3 - [Name]

Specifies the numerical name of a partition. For example, '0'. You can find the partition name in the Show All output. The default value is ALL, which displays information of all partitions of the specified type.

For example, to view the storage unit and disk pool configuration for all of MSDP partitions, run the following command:

Show Partition Configuration MSDP ALL

To view the usage information of all the partitions, run the following command:

Show Partition Usage ALL ALL

EXAMPLES

The following is an example output of the Show Partition Configuration MSDP ALL command:

MSDP
-------------------------------------
Disk Pool (DP)   | Storage Unit (STU)
-------------------------------------
dp_disk_abc123 | stu_disk_abc123