Veritas NetBackup™ Appliance Commands Reference Guide

Last Published:
Product(s): Appliances (4.1)
Platform: NetBackup Appliance OS
  1. Overview
    1.  
      About the NetBackup Appliance Shell Menu
    2. Logging in to the NetBackup Appliance Shell Menu
      1.  
        Command limitations on appliances that are not configured
    3.  
      Using the NetBackup Appliance Shell Menu
    4. About the NetBackup Appliance Shell Menu command views
      1.  
        About the commands under the Appliance view
      2.  
        About the commands under the Manage view
      3.  
        About the commands under the Monitor view
      4.  
        About the commands under the Network view
      5.  
        About the commands under the Reports view
      6.  
        About the commands under the Settings view
      7.  
        About the commands under the Support view
  2. Appendix A. Main > Appliance commands
    1.  
      Appliance > Primary
    2.  
      Appliance > Media
    3.  
      Appliance > Management
    4.  
      Appliance > Remove
    5.  
      Appliance > ShowDedupPassword
    6.  
      Appliance > ShowIdentity
    7.  
      Appliance > Status
  3. Appendix B. Main > Manage > FibreChannel commands
    1.  
      Manage > FibreChannel > Clean
    2.  
      Manage > FibreChannel > Configure
    3.  
      Manage > FibreChannel > Reset
    4.  
      Manage > FibreChannel > Scan
    5.  
      Manage > FibreChannel > Show
    6.  
      Manage > FibreChannel > Statistics
  4. Appendix C. Main > Manage > HighAvailability commands
    1.  
      Manage > HighAvailability > AddNode
    2.  
      Manage > HighAvailability > GetAssetTag
    3.  
      Manage > HighAvailability > RemoveNode
    4.  
      Manage > HighAvailability > Setup
    5.  
      Manage > HighAvailability > Status
    6.  
      Manage > HighAvailability > Switchover
  5. Appendix D. Main > Manage > Libraries commands
    1.  
      Manage > Libraries > Configure
    2.  
      Manage > Libraries > Deny
    3.  
      Manage > Libraries > Down
    4.  
      Manage > Libraries > Inventory
    5.  
      Manage > Libraries > List
    6.  
      Manage > Libraries > Requests
    7.  
      Manage > Libraries > Reset
    8.  
      Manage > Libraries > Resubmit
    9.  
      Manage > Libraries > Up
  6. Appendix E. Main > Manage > Libraries > Advanced > ACS commands
    1.  
      Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
    2.  
      Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
    3.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
    4.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
    5.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
    6.  
      Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
    7.  
      Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
    8.  
      Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
    9.  
      Manage > Libraries > Advanced > ACS > TestACS
    10.  
      Manage > Libraries > Advanced > ACS > ViewVMconf
  7. Appendix F. Main > Manage > License commands
    1.  
      Manage > License > Add
    2.  
      Manage > License > List
    3.  
      Manage > License > ListInfo
    4.  
      Manage > License > Remove
  8. Appendix G. Main > Manage > MountPoints commands
    1.  
      Manage > MountPoints > List
    2.  
      Manage > MountPoints > Mount
    3.  
      Manage > MountPoints > Unmount
  9. Appendix H. Main > Manage > NetBackup CLI commands
    1.  
      Manage > NetBackupCLI > Create
    2.  
      Manage > NetBackupCLI > Delete
    3.  
      Manage > NetBackupCLI > List
  10. Appendix I. Main > Manage > OpenStorage commands
    1.  
      Manage > OpenStorage > Install
    2.  
      Manage > OpenStorage > List
    3.  
      Manage > OpenStorage > Readme
    4.  
      Manage > OpenStorage > Share
    5.  
      Manage > OpenStorage > Uninstall
  11. Appendix J. Main > Manage > Software commands
    1.  
      Manage > Software > Cancel
    2.  
      Manage > Software > Delete
    3.  
      Manage > Software > Download
    4.  
      Manage > Software > DownloadAnalyzer
    5.  
      Manage > Software > DownloadProgress
    6.  
      Manage > Software > Firmware
    7.  
      Manage > Software > Install
    8.  
      Manage > Software > List
    9.  
      Manage > Software > Readme
    10.  
      Manage > Software > Rollback
    11.  
      Manage > Software > Share
    12.  
      Manage > Software > UpgradeStatus
    13.  
      Manage > Software > VxUpdate
  12. Appendix K. Main > Manage > Storage commands
    1.  
      Manage > Storage > Add
    2.  
      Manage > Storage > Create
    3.  
      Manage > Storage > Delete
    4.  
      Manage > Storage > Edit
    5.  
      Manage > Storage > Monitor
    6.  
      Manage > Storage > Move
    7.  
      Manage > Storage > Remove
    8.  
      Manage > Storage > Resize
    9.  
      Manage > Storage > Scan
    10.  
      Manage > Storage > Show
    11.  
      Manage > Storage > Erase
  13. Appendix L. Main > Manage > Tapes commands
    1.  
      Manage > Tapes > Cleaning
    2.  
      Manage > Tapes > Delete
    3.  
      Manage > Tapes > Eject
    4.  
      Manage > Tapes > Freeze
    5.  
      Manage > Tapes > Inventory
    6.  
      Manage > Tapes > List
    7.  
      Manage > Tapes > ListNetBackupMedia
    8.  
      Manage > Tapes > Suspend
    9.  
      Manage > Tapes > Unfreeze
    10.  
      Manage > Tapes > Unsuspend
  14. Appendix M. Main > Manage > Certificates commands
    1.  
      Manage > Certificates > Generate
    2.  
      Manage > Certificates > Delete
  15. Appendix N. Main > Monitor commands
    1.  
      Monitor > Beacon
    2.  
      Monitor > MemoryStatus
    3.  
      Monitor > NetBackup
    4.  
      Monitor > NetworkStatus
    5.  
      Monitor > SDCS
    6.  
      Monitor > Top
    7.  
      Monitor > Uptime
    8.  
      Monitor > Who
    9.  
      Monitor > Hardware
  16. Appendix O. Main > Network commands
    1.  
      Network > Configure
    2.  
      Network > Date
    3.  
      Network > DNS
    4.  
      Network > Gateway
    5.  
      Network > Hostname
    6.  
      Network > Hosts
    7.  
      Network > IPv4
    8.  
      Network > IPv6
    9.  
      Network > LinkAggregation
    10.  
      Network > NetStat
    11.  
      Network > NTPServer
    12.  
      Network > Ping
    13.  
      Network > SetProperty
    14.  
      Network > Show
    15.  
      Network > TimeZone
    16.  
      Network > TraceRoute
    17.  
      Network > Unconfigure
    18.  
      Network > VLAN
    19.  
      Network > WANOptimization
  17. Appendix P. Main > Network > Security commands (IPsec)
    1.  
      Network > Security > Configure
    2.  
      Network > Security > Delete
    3.  
      Network > Security > Export
    4.  
      Network > Security > Import
    5.  
      Network > Security > Provision
    6.  
      Network > Security > Refresh
    7.  
      Network > Security > Show
    8.  
      Network > Security > Unconfigure
  18. Appendix Q. Main > Reports commands
    1.  
      Reports > Deduplication
    2.  
      Reports > Process
  19. Appendix R. Main > Settings commands
    1.  
      Settings > Deduplication
    2.  
      Settings > FibreTransport
    3.  
      Settings > iSCSI > Initiator
    4.  
      Settings > iSCSI > Interface
    5.  
      Settings > iSCSI > Target
    6.  
      Settings > LogForwarding
    7.  
      Settings > LifeCycle
    8.  
      Settings > NetBackup
    9.  
      Settings > NetBackup DNAT
    10.  
      Settings > NetBackup NATServers
    11.  
      Settings > Password
    12.  
      Settings > Share
    13.  
      Settings > SNMP polling
    14.  
      Settings > Sysctl
    15.  
      Settings > SystemLocale
  20. Appendix S. Main > Settings > Alerts commands
    1.  
      Settings > Alerts > CallHome
    2.  
      Settings > Alerts > Email
    3.  
      Settings > Alerts > Hardware
    4.  
      Settings > Alerts > SNMP
  21. Appendix T. Main > Settings > Notifications view commands
    1.  
      Settings > Notifications > LoginBanner
  22. Appendix U. Main > Settings > Security commands
    1.  
      Settings > Security > Authorization
    2.  
      Settings > Security > Authentication > AccountStatus
    3.  
      Settings > Security > Authentication > ActiveDirectory
    4.  
      Main > Settings > Security > Authentication > CIFSShare
    5.  
      Settings > Security > Authentication > Kerberos
    6.  
      Settings > Security > Authentication > LDAP
    7.  
      Settings > Security > Authentication > LocalUser
    8.  
      Main > Settings > Security > Certificate
    9.  
      Main > Settings > Security > Certificate > CertificateSigningRequest
    10.  
      Main > Settings > Security > FIPS
    11.  
      Main > Settings > Security > Ports
    12.  
      Main > Settings > Security > STIG
    13.  
      Main > Settings > Security > SecurityLevel
  23. Appendix V. Main > Support commands
    1.  
      Support > Checkpoint
    2.  
      Support > Cleanup > CleanMonInvData
    3.  
      Support > Cleanup > RemoveShelfEntries
    4.  
      Support > Cleanup > ResetDIMMErrors
    5.  
      Support > Collect
    6.  
      Support > DataCollect
    7.  
      Support > Disk
    8.  
      Support > Errors
    9.  
      Support > FactoryReset
    10.  
      Support > FibreTransport
    11.  
      Support > InfraServices
    12.  
      Support > InstantAccess
    13.  
      Support > iostat
    14.  
      Support > IPMI
    15.  
      Support > KillRemoteCall
    16.  
      Support > LogBrowser
    17.  
      Support > Logs
    18.  
      Support > Maintenance
    19.  
      Support > Messages
    20.  
      Support > NBDNA
    21.  
      Support > nbperfchk
    22.  
      Support > NBSU
    23.  
      Support > Processes
    24.  
      Support > RAID
    25.  
      Support > Reboot
    26.  
      Support > RecoverStorage
    27.  
      Support > Service
    28.  
      Support > ServiceAllowed
    29.  
      Support > ShelfOrdering
    30.  
      Support > Show
    31.  
      Support > Shutdown
    32.  
      Support > Storage ClearReservations
    33.  
      Support > Storage Reset
    34.  
      Support > Storage SanityCheck
    35.  
      Support > System
    36.  
      Support > Test

Name

Main > Support > iostat — Monitor system input and output device loading

SYNOPSIS

iostat help

iostat run

iostat [options] [interval] [count]

DESCRIPTION

The iostat command is a Linux command that you can use to monitor system input and output devices. The command enables you to observe the time that the devices are active in relation to their average transfer rates. This command generates reports that you can use to change the system configuration to better balance the input and the output load between physical disks. The iostat command generates reports continuously.

Note:

You must run the iostat run command before you can use the available options that are supported for the iostat command.

OPTIONS

iostat help

View the help information of the command.

iostat run

Prompts you to enter the available options that are supported.

[options]

The following list describes the available options that are supported:

  • -c

    Display the CPU utilization report.

  • -d

    Display the device utilization report.

  • -N

    Display the registered device mapper names for any device mapper devices.

  • -n

    Display the network file system (NFS) report. This option works only with kernel 2.6.17 and later.

  • -h

    Make the NFS report that is displayed by option -n easier to read.

  • -k

    Display statistics in kilobytes per second instead of blocks per second.

  • -m

    Display statistics in megabytes per second instead of blocks or kilobytes per second.

  • -t

    Print the time for each report displayed.

  • -V

    Print the version number then exit.

  • -x

    Display the extended statistics.

  • -p [ { device [,...] | ALL } ]

    The -p option displays the statistics for block devices and all their partitions that the system uses. If a device name is entered on the command line, then the statistics for it and all of its partitions are displayed. The ALL keyword indicates that statistics have to be displayed for all the block devices and partitions defined by the system. That includes those that have never been used.

  • [device [,...] | ALL]

    If a device name is entered on the command line, then the statistics for it and all of its partitions are displayed. The ALL keyword indicates that statistics have to be displayed for all the block devices and partitions defined by the system. That includes those that have never been used.

[interval]
  • The interval parameter specifies the amount of time in seconds between each report.

  • The first report contains statistics for the time since system startup. Each subsequent report contains statistics that are collected during the interval since the previous report.

[count]
  • The count parameter can be specified with the interval parameter.

  • If the count parameter is specified, the value of count determines the number of reports that are generated at interval seconds apart.

EXAMPLES

The following example shows how to use the iostat command:

abc123.Support> iostat run
Please enter options:
iostat -c

The following example shows how to use the interval parameter:

abc123.Support> iostat run
Please enter options:
iostat -c 1