NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
NetBackup status code: 8446
Explanation: The IP addresses provided in ipList of the networkLoadBalancer are incorrect. The IP addresses in the primaryServers or the mediaServers section in the environment CR YAML are not in the correct format.
Recommended Action: Perform the following as appropriate:
Ensure that the format of IP addresses specified in the primaryServers or mediaServers section in environment CR are valid.
If the format of the IP addresses is not correct, edit the environment CR with either of following steps and update the IP address format in the respective sections.
Edit environment CR using the following command and save:
kubectl edit environments.netbackup.veritas.com <netbackup-environment-name> -n <environmentCR-namespace>
Edit the environment CR YAML and apply the change using the following command:
kubectl apply -f <environment.yaml>
Click here to view technical notes and other information on the Veritas Technical Support website about this status code.