Veritas Access 3360 Appliance Product Description
- About the Access 3360 Appliance
- About the Veritas Access 3360 Appliance
- Features and components of the appliance
- Locating the appliance serial number
- About 3360 compute node drive configurations
- About the compute node front panel USB port
- About the compute node control panel
- About the compute node rear panel
- Standard 3360 Appliance PCIe-based I/O configuration
- About the Veritas 5U84 Storage Shelves
- About Veritas Access 3360 Appliance storage shelves
- About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
- Access 3360 Appliance and 5U84 Storage Shelf cables
- Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
- Index
About the compute node drive LEDs
Each 3360 Appliance compute node drive module contains two LEDs on the left side of each module.
The LED status descriptions are described in the following table.
Table: 3360 Appliance compute node drive LED Status descriptions
Description | LED behavior | Condition |
|---|---|---|
Amber Status LED | Off | No disk drive access and no drive faults |
Solid amber | A drive fault has occurred | |
Blinking amber | A RAID rebuild is in progress (1 Hz blink) Locating/identifying the drive (2 Hz blink) | |
Green Activity LED | Off | Power on - the drive has spun down |
Solid green | Power on - no drive activity | |
Blinking green | Power on - the drive is processing I/O or Power on - the drive is spinning up | |
Note:
Drive modules that do not contain drives also have LEDs. Although there may not be drive activity, some colored lights may still be seen through the disk modules.