Veritas Access 3360 Appliance Product Description
- About the Access 3360 Appliance
- About 3360 compute node drive configurations
- About the compute node control panel
- Standard 3360 Appliance PCIe-based I/O configuration
- About the Veritas 5U84 Storage Shelves
- About Veritas Access 3360 Appliance storage shelves
- About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
- Access 3360 Appliance and 5U84 Storage Shelf cables
- Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
Broadcom P225p 10/25Gb PCIe Ethernet card
The Broadcom® BCM957414A4142CC is a dual-port 25 Gb/s, PCI-Express Gen3 x8 Network Interface Card that supports both SFP28/SFP+ optical modules and copper direct attach cable. The card uses the Broadcom BCM57414 25GbE MAC controller with the integrated dual channel 25GbE SFI transceiver.
By default, a 10 GB SFP is shipped with the appliance.
Note:
The Broadcom P225p 10/25Gb PCIe Ethernet card does not support the installation of a 10G SFP and 25G SFP within the same card. You must either have SFPs with the same maximum speed on both ports at any given time or remove the unused SFP from the card.
Table: Broadcom P225p NIC adapter specifications
Item | Specification |
---|---|
Bracket height | Full height |
Power consumption | Typical: 12.5 watts Maximum: 12.9 watts |
Operating temperature | 0°C to 55°C (32 F to 131 F) |
Storage temperature | -40°C to +70°C (-49°F to +221°F) |
Storage humidity | 90% at 35°C |
System interface type | PCIe v3.0 |
Speed and slot width | 8.0 GT/s (gigatransfers per second), 8-Lane |
Data rate supported per port | 10/25Gb |
Air Flow (minimum) | 150 LFM (linear feet per minute) |