Veritas NetBackup™ Appliance Commands Reference Guide

Last Published:
Product(s): Appliances (5.3)
Platform: NetBackup Appliance OS
  1. Overview
    1.  
      About the NetBackup Appliance Shell Menu
    2. Logging in to the NetBackup Appliance Shell Menu
      1.  
        Command limitations on appliances that are not configured
    3.  
      Using the NetBackup Appliance Shell Menu
    4. About the NetBackup Appliance Shell Menu command views
      1.  
        About the commands under the Appliance view
      2.  
        About the commands under the Manage view
      3.  
        About the commands under the Monitor view
      4.  
        About the commands under the Network view
      5.  
        About the commands under the Reports view
      6.  
        About the commands under the Settings view
      7.  
        About the commands under the Support view
  2. Appendix A. Main > Appliance commands
    1.  
      Appliance > Primary
    2.  
      Appliance > Media
    3.  
      Appliance > Management
    4.  
      Appliance > Remove
    5.  
      Appliance > ShowDedupPassword
    6.  
      Appliance > ShowIdentity
    7.  
      Appliance > Status
  3. Appendix B. Main > Manage > FibreChannel commands
    1.  
      Manage > FibreChannel > Clean
    2.  
      Manage > FibreChannel > Configure
    3.  
      Manage > FibreChannel > Reset
    4.  
      Manage > FibreChannel > Scan
    5.  
      Manage > FibreChannel > Show
    6.  
      Manage > FibreChannel > Statistics
  4. Appendix C. Main > Manage > HighAvailability commands
    1.  
      Manage > HighAvailability > AddNode
    2.  
      Manage > HighAvailability > AutoFix
    3.  
      Manage > HighAvailability > GetAssetTag
    4.  
      Manage > HighAvailability > RemoveNode
    5.  
      Manage > HighAvailability > Setup
    6.  
      Manage > HighAvailability > Status
    7.  
      Manage > HighAvailability > Switchover
  5. Appendix D. Main > Manage > Libraries commands
    1.  
      Manage > Libraries > Configure
    2.  
      Manage > Libraries > Deny
    3.  
      Manage > Libraries > Down
    4.  
      Manage > Libraries > Inventory
    5.  
      Manage > Libraries > List
    6.  
      Manage > Libraries > Requests
    7.  
      Manage > Libraries > Reset
    8.  
      Manage > Libraries > Resubmit
    9.  
      Manage > Libraries > Up
  6. Appendix E. Main > Manage > Libraries > Advanced > ACS commands
    1.  
      Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
    2.  
      Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
    3.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
    4.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
    5.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
    6.  
      Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
    7.  
      Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
    8.  
      Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
    9.  
      Manage > Libraries > Advanced > ACS > TestACS
    10.  
      Manage > Libraries > Advanced > ACS > ViewVMconf
  7. Appendix F. Main > Manage > License commands
    1.  
      Manage > License
  8. Appendix G. Main > Manage > MountPoints commands
    1.  
      Manage > MountPoints > List
    2.  
      Manage > MountPoints > Mount
    3.  
      Manage > MountPoints > Unmount
  9. Appendix H. Main > Manage > NetBackup CLI commands
    1.  
      Manage > NetBackupCLI > AllowSelfService
    2.  
      Manage > NetBackupCLI > Create
    3.  
      Manage > NetBackupCLI > Delete
    4.  
      Manage > NetBackupCLI > List
  10. Appendix I. Main > Manage > OpenStorage commands
    1.  
      Manage > OpenStorage > Install
    2.  
      Manage > OpenStorage > List
    3.  
      Manage > OpenStorage > Readme
    4.  
      Manage > OpenStorage > Share
    5.  
      Manage > OpenStorage > Uninstall
  11. Appendix J. Main > Manage > Software commands
    1.  
      Manage > Software > Cancel
    2.  
      Manage > Software > Delete
    3.  
      Manage > Software > Download
    4.  
      Manage > Software > DownloadAnalyzer
    5.  
      Manage > Software > DownloadProgress
    6.  
      Manage > Software > Firmware
    7.  
      Manage > Software > Install
    8.  
      Manage > Software > List
    9.  
      Manage > Software > Readme
    10.  
      Manage > Software > Rollback
    11.  
      Manage > Software > Share
    12.  
      Manage > Software > UpgradeReadinessCheck
    13.  
      Manage > Software > UpgradeStatus
    14.  
      Manage > Software > VxUpdate
  12. Appendix K. Main > Manage > Storage commands
    1.  
      Manage > Storage > Add
    2.  
      Manage > Storage > Create
    3.  
      Manage > Storage > Delete
    4.  
      Manage > Storage > Edit
    5.  
      Manage > Storage > Monitor
    6.  
      Manage > Storage > Move
    7.  
      Manage > Storage > Remove
    8.  
      Manage > Storage > Resize
    9.  
      Manage > Storage > Scan
    10.  
      Manage > Storage > Show
  13. Appendix L. Main > Manage > Tapes commands
    1.  
      Manage > Tapes > Cleaning
    2.  
      Manage > Tapes > Delete
    3.  
      Manage > Tapes > Eject
    4.  
      Manage > Tapes > Freeze
    5.  
      Manage > Tapes > Inventory
    6.  
      Manage > Tapes > List
    7.  
      Manage > Tapes > ListNetBackupMedia
    8.  
      Manage > Tapes > Suspend
    9.  
      Manage > Tapes > Unfreeze
    10.  
      Manage > Tapes > Unsuspend
  14. Appendix M. Main > Monitor commands
    1.  
      Monitor > Beacon
    2.  
      Monitor > Hardware
    3.  
      Monitor > MemoryStatus
    4.  
      Monitor > NetBackup
    5.  
      Monitor > NetworkStatus
    6.  
      Monitor > SDCS
    7.  
      Monitor > Top
    8.  
      Monitor > Uptime
    9.  
      Monitor > Who
  15. Appendix N. Main > Network commands
    1.  
      Network > Configure
    2.  
      Network > Date
    3.  
      Network > DNS
    4.  
      Network > Gateway
    5.  
      Network > Hostname
    6.  
      Network > Hosts
    7.  
      Network > IPv4
    8.  
      Network > IPv6
    9.  
      Network > LinkAggregation
    10.  
      Network > NetStat
    11.  
      Network > NTPServer
    12.  
      Network > Ping
    13.  
      Network > SetProperty
    14.  
      Network > Show
    15.  
      Network > TimeZone
    16.  
      Network > TraceRoute
    17.  
      Network > Unconfigure
    18.  
      Network > VLAN
    19.  
      Network > WANOptimization
  16. Appendix O. Main > Network > Security commands (DeviceCert)
    1.  
      Network > Security > Export
    2.  
      Network > Security > Import
  17. Appendix P. Main > Reports commands
    1.  
      Reports > Deduplication
    2.  
      Reports > Process
  18. Appendix Q. Main > Settings commands
    1.  
      Settings > Deduplication
    2.  
      Settings > FibreTransport
    3.  
      Settings > iSCSI > Initiator
    4.  
      Settings > iSCSI > Interface
    5.  
      Settings > iSCSI > Target
    6.  
      Settings > LifeCycle
    7.  
      Settings > LogForwarding
    8.  
      Settings > NetBackup
    9.  
      Settings > NetBackup DNAT
    10.  
      Settings > NetBackup NATServers
    11.  
      Settings > Password
    12.  
      Settings > Share
    13.  
      Settings > SNMP
    14.  
      Settings > Sysctl
    15.  
      Settings > SystemLocale
  19. Appendix R. Main > Settings > Alerts commands
    1.  
      Settings > Alerts > CallHome
    2.  
      Settings > Alerts > Email
    3.  
      Settings > Alerts > Hardware
    4.  
      Settings > Alerts > SNMP
    5.  
      Settings > Alerts > Transmission
  20. Appendix S. Main > Settings > Notifications view commands
    1.  
      Settings > Notifications > LoginBanner
  21. Appendix T. Main > Settings > Security commands
    1.  
      Settings > Security > Antimalware
    2.  
      Settings > Security > Authorization
    3.  
      Settings > Security > Authentication > AccountStatus
    4.  
      Settings > Security > Authentication > ActiveDirectory
    5.  
      Main > Settings > Security > Authentication > CIFSShare
    6.  
      Settings > Security > Authentication > LDAP
    7.  
      Settings > Security > Authentication > LocalUser
    8.  
      Settings > Security > Authentication > MFA
    9.  
      Settings > Security > Authentication > SingleSignOn
    10.  
      Settings > Security > Authentication > SmartCard > SSH
    11.  
      Settings > Security > Authentication > SmartCard
    12.  
      Main > Settings > Security > Certificate
    13.  
      Main > Settings > Security > Certificate > CertificateSigningRequest
    14.  
      Main > Settings > Security > FIPS
    15.  
      Settings > Security > NetworkAccessControl
    16.  
      Main > Settings > Security > PasswordAge
    17.  
      Main > Settings > Security > Ports
    18.  
      Main > Settings > Security > SecurityLevel
    19.  
      Main > Settings > Security > Sessions
    20.  
      Main > Settings > Security > STIG
  22. Appendix U. Main > Support commands
    1.  
      Support > Checkpoint
    2.  
      Support > Cleanup > CleanMonInvData
    3.  
      Support > Cleanup > RemoveShelfEntries
    4.  
      Support > Cleanup > ResetDIMMErrors
    5.  
      Support > Collect
    6.  
      Support > DataCollect
    7.  
      Support > Disk
    8.  
      Support > Errors
    9.  
      Support > FactoryReset
    10.  
      Support > FibreTransport
    11.  
      Support > ImportISO
    12.  
      Support > InfraServices
    13.  
      Support > InstantAccess
    14.  
      Support > iostat
    15.  
      Support > IPMI
    16.  
      Support > KillRemoteCall
    17.  
      Support > LogBrowser
    18.  
      Support > Logs
    19.  
      Support > Maintenance
    20.  
      Support > Messages
    21.  
      Support > NBDNA
    22.  
      Support > Nbperfchk
    23.  
      Support > NBSU
    24.  
      Support > Processes
    25.  
      Support > RAID
    26.  
      Support > Reboot
    27.  
      Support > RecoverStorage
    28.  
      Support > Service
    29.  
      Support > ShelfOrdering
    30.  
      Support > SHMCLI
    31.  
      Support > Show
    32.  
      Support > Shutdown
    33.  
      Support > Storage ClearReservations
    34.  
      Support > Storage SanityCheck
    35.  
      Support > Storage Show
    36.  
      Support > System
    37.  
      Support > Test

Name

Main > Settings > Security > NetworkAccessControl — configure and manage the allowed list IP addresses to control network access on an appliance.

SYNOPSIS

AddIP

DeleteIP

Show

DESCRIPTION

The NetworkAccessControl command lets you control which IPv4 or IPv6 addresses are allowed to access the appliance.

Appliance access is allowed through HTTPS for the NetBackup Appliance Web Console or rest APIs, and through SSH for the NetBackup Appliance Shell Menu. To permit access to a specific appliance, add the necessary client IP addresses to the allowed list for that appliance. Any client IP addresses that are not included in the allowed list cannot access the appliance. Any interface level restrictions are managed separately and are also appliance-specific.

For high availability (HA) setups, you must configure the NetworkAccessControl options manually on both appliance nodes and the configurations must match.

Note the following limitations:

  • You cannot enter a client hostname and automatically link to the associated client IP address.

  • Adding only the IPv6 address of a client does not allow access for that client when using IPv4. You must add both IPv4 and IPv6 addresses for the client to have access using either method.

  • When you add IP addresses, make sure that you do not overlap with any existing configured IP address, address range, or subnet CIDR (Classless Inter-Domain Routing). In these scenarios, an error message appears to inform you that the entered IP address or addresses were not added.

  • For high availability (HA) setups, only after the HA setup has been created and the partner node added to it, you can configure and enable the NetworkAccessControl feature. You must configure this feature manually on both appliance nodes and the configurations must match.

  • If your appliance is configured as an Appliance Management Server (AMS) or is an agent for an AMS, make sure that you add those IP addresses to the allowed list. The AMS must include the IP addresses of the agents, and the agents must include the IP address of the AMS.

OPTIONS

The following describes the options for the NetworkAccessControl command:

AddIP

Add one or more client IP addresses to the allowed list on the current appliance. To add multiple addresses, choose from the following:

  • To enter multiple addresses, add a comma (,) between each address.

  • To enter a range of consecutive IP addresses, add a hyphen or dash (-) between the IP addresses. For example: 10.188.133.105-10.188.133.109

  • You can also use CIDR notation to enter a range of IP addresses. For example: 10.188.133.100/30

DeleteIP

Delete one or more existing IP addresses from the allowed list on the current appliance.

Show

Display the configured IP addresses in the allowed list on the current appliance.