Veritas Flex Appliance SNMP Traps Reference Guide
- Overview
- SNMP traps
- vrtsapplianceClusterServicesTrap
- vrtsapplianceLocalServicesTrap
- vrtsbbuTrap
- vrtscmosbatteryTrap
- vrtscpuTrap
- vrtsdimmTrap
- vrtsdiskTrap
- vrtsenclosurediskTrap
- vrtsenclosurefanTrap
- vrtsenclosurepowerTrap
- vrtsenclosuretemperatureTrap
- vrtsfanTrap
- vrtsfibrechannelTrap
- vrtsfirmwareTrap
- vrtspowerTrap
- vrtsraidgroupTrap
- vrtsssdTrap
- vrtstemperatureTrap
- vrtsvolumeTrap
vrtscmosbatteryTrap
OID: 1.3.6.1.4.1.48328.3.9.1.32
Note:
The vrtsbbuTrap applies only to the Veritas 5250 Appliance.
The vrtscmosbatteryTrap monitors the status of the CMOS battery on the appliance. If you receive an alert, it means that the battery has experienced an error or has failed.
Check the SNMP trap or the email alert that you received for additional information to help you determine the exact issue that occurred. You can also check the show hardware-health commands. See the Flex Appliance Getting Started and Administration Guide for details.
Based on the information, take one of the following actions:
Table: Next steps for the vrtscmosbatteryTrap
What happened | What to do now |
|---|---|
If the CMOS battery State is Critical, the CMOS battery voltage is below its operational range and needs to be replaced. | Contact Veritas Technical Support to replace the CMOS battery. |
If the CMOS battery State is Critical, the CMOS battery failed. | Contact Veritas Technical Support to replace the CMOS battery. |