Veritas Flex Appliance SNMP Traps Reference Guide
- Overview
- SNMP traps
- vrtsapplianceClusterServicesTrap
- vrtsapplianceLocalServicesTrap
- vrtsbbuTrap
- vrtscmosbatteryTrap
- vrtscpuTrap
- vrtsdimmTrap
- vrtsdiskTrap
- vrtsenclosurediskTrap
- vrtsenclosurefanTrap
- vrtsenclosurepowerTrap
- vrtsenclosuretemperatureTrap
- vrtsfanTrap
- vrtsfibrechannelTrap
- vrtsfirmwareTrap
- vrtspowerTrap
- vrtsraidgroupTrap
- vrtsssdTrap
- vrtstemperatureTrap
- vrtsvolumeTrap
vrtsbbuTrap
OID: 1.3.6.1.4.1.48328.3.9.1.19
Note:
The vrtsbbuTrap applies only to the Veritas 53xx Appliance.
The vrtsbbuTrap monitors the status of the Primary Storage Shelf Battery Backup Unit (BBU) of your appliance. If you receive an alert, it means that the BBU has experienced an error and could cause a performance drop for the storage system.
Check the SNMP trap or the email alert that you received for additional information to help you determine the exact issue that occurred. You can also check the show hardware-health commands. See the Flex Appliance Getting Started and Administration Guide for details.
Based on the information, take one of the following actions:
Table: Next steps for the vrtsbbuTrap
What happened | What to do now |
|---|---|
If the BBU voltage_state or charge_state is Warning and the voltage_status or charge_status is Degraded, the Super Capacitor measure voltage or charge is not within the optimal range. | Contact Veritas Support for assistance. |
If the BBU voltage_state or charge_state is Failed and the voltage_status or charge_status is Fault, the Super Capacitor is showing signs of failure. | Contact Veritas Support to replace the storage controller. |