NetBackup IT Analytics Report Reference Guide
- Introduction to NetBackup IT Analytics
- Alert Reports
- Risk Mitigation Solution Reports
- Risk Mitigation Reports
- Storage Optimization Solution Reports
- System Administration Reports
- Oracle Job Overview
- Capacity Manager Reports
- Application Capacity Reports
- Array Capacity and Utilization Reports
- Array Capacity & Utilization (Generic Data)
- Array Capacity & Utilization (IBM SVC View)
- Array Capacity and Utilization (IBM XIV View)
- Array Capacity and Utilization (NetApp View)
- Array Capacity and Utilization (NetApp Cluster)
- NetApp Storage System Detail
- Array Capacity and Utilization (OpenStack Swift)
- IBM Array Site Summary
- IBM Array Detail
- LUN Utilization Summary
- NetApp Aggregate Detail
- NetApp Cluster-Mode Aggregate Detail
- NetApp Plex Details
- NetApp Volume Details
- NetApp Cluster-Mode Volume Detail
- NetApp StorageGrid Tenant Summary
- Available/Reclaimable Capacity Reports
- Capacity at Risk Reports
- Capacity Chargeback Reports
- Host Capacity Utilization Reports
- SnapMirror Reports
- SnapVault Reports
- Capacity Forecasting Reports
- Storage Performance Reports
- Mission Control for Performance Analysis
- Thin Provisioning Reports
- Hitachi Dynamic Provisioning Pool Utilization
- File Analytics Reports
- Virtualization Manager Reports
- Understanding the Datastore
- VM Server Detail
- VM Snapshot Summary
- VM Detail
- Datastore Utilization Summary
- Datastore Detail
- Fabric Manager Reports
- Host to Storage Dashboard
- Backup Manager Management Reports
- Error Log Summary
- Job Duration Report
- Veeam Backup & Replication Job Summary Report (Homogeneous)
- Veeam and RMAN Job Details Report
- Adding a Note to a Job
- Job Volume Summary Report
- NetBackup deduplication to MSDP savings
- Backup Administration Reports
- Host Details
- IBM Spectrum Protect (TSM) Storage Pools Dashboard
- Backup Media Management Reports
- TSM Tape Media Detail Table
- Backup Service Level Agreement (SLA) Reports
- Determining and Improving Backup Start Time Performance
- Determining and Improving Backup Success Performance
- Determining and Improving Backup Duration Performance
- Backup Storage Utilization Reports
- Backup Manager Forecasting Reports
- Backup Billing and Usage Reports
- Backup Policies Reports
- Public Cloud Reports
By Server
The Error Log Summaryreports backup failure details that have been gleaned from backup error logs. Use this report in conjunction with the Largest Backup Volume report to mitigate future problems by determining which types of errors occurred with the greatest frequency.
See Largest Backup Volume .
The Error Code Description typically provides sufficient details to start your troubleshooting process. For example, a NetBackup error code of 196 would be an indicator that there are not enough resources available and a Virtual Tape Library (VTL) may be needed. The 196 indicates that the client backup cannot begin because drives are not available. Refer to the backup product's reference guides for additional guidance.
This report displays a number of links that enable drill down access to additional details, as described in the following table.
The Error Log Summaryprovides the following information:
Note:
Some of the following fields do not appear in every Error Log Summary. Each of the three report types--Client, Server, Policy--contains only the fields that make sense for its group.
Table: Error Log Summary
Column name | Description |
---|---|
Server |
The server is the system that is managing the storage devices. |
Source |
Name of backup source. If the backup source is a known host, host name is displayed with a drill down to the Host Details report. For other backup sources, the object name is displayed with a drill down to the Object Details report. |
Source Type |
Type of backup source, such as datastore, folder, database, virtual machine, and so on. |
IP Address |
The IP address of the client, shown only in the Error Log Summary By Client report. |
Policy Name |
If you selected Group By Policy through the Report Designer, the policy name appears in this column. This column does not appear if you selected Group By Management Server. |
Backup Product |
Indicates the backup software running on the server where the error occurred. Refer to that product's documentation to correlate the error code to diagnose problems.
|
Error Code |
Numeric code reported by the backup product. Refer to the backup product's reference guides for troubleshooting advice. |
Error Occurrences |
Each row in the table displays the number of occurrences for each error code within the report's selected time frame. Click on any error occurrence to go to the Job Summary report, which lists the events that correspond to that particular error code. |
Last Error Date |
Click on the Last Error Date to go to the Job Summaryreport, which displays the most recent error events only, including skipped files. If the dates are missing the century, 2000 is added to the date. |
Error Code Description |
Each row in the table includes a detailed error description that provides you with valuable information. Since the data is derived from backup job error logs, this description is backup-product dependent. |