Please enter search query.
Search <book_title>...
Veritas Access Appliance Command Reference Guide
Last Published:
2018-10-02
Product(s):
Appliances (7.3.2)
Platform: 3340
- Overview
- Appendix A. Main > Appliance
- Appendix B. Main > Manage > Cluster
- Appendix C. Main > Manage > Software
- Appendix D. Main > Manage > Storage
- Appendix E. Main > Network
- Network > Configure
- Network > Date
- Network > DNS
- Network > Gateway
- Network > Hosts
- Network > IPv4
- Network > IPv6
- Network > SetProperty
- Network > Show
- Network > TimeZone
- Network > NetStat
- Network > NTPServer
- Network > Unconfigure
- Network > VLAN
- Network > TraceRoute
- Network > Ping
- Network > Hostname
- Network > Proxy
- Appendix F. Main > Monitor
- Appendix G. Main > Settings
- Appendix H. Main > Support
Name
Main > Network > Configure — Configure the appliance to a network.
SYNOPSIS
Configure IPAddress Netmask GatewayIPAddress InterfaceNames
DESCRIPTION
You can use the Configure command to configure the IP address of a single interface on the network that you want to connect your appliance to. When you use this command, you need to define the IP address, the netmask address, and the gateway address.
Use the Network > Gateway command to add the routing information for default route or to add route for VLAN interfaces.
OPTIONS
- Configure IPAddress Netmask GatewayIPAddress InterfaceNames
Configure the IP address and default gateway for the appliance. The command configures the IP address and sets the default gateway.
EXAMPLES
The following example shows how to configure your appliance network settings:
Network > Configure 10.180.2.3 255.255.255.0 eth1