Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
Media Manager status code 55
Explanation: A request was made to add or change volumes in the volume configuration. The robot number and volume group that is associated with the volume configuration changes are in conflict with the requirements for volume groups. All volumes in a volume group are required to have the same residence, which includes having the same robot number.
Recommended Action:
Examine command output, debug logs, and system logs for a more detailed message on the error.
See "Setting Media Manager debug logging to a higher level" in the NetBackup Logging Reference Guide.
Ensure that the specified robot number and volume group are compatible. If volumes in the volume group have a given robot number, then volumes with a different robot number cannot be added to that volume group. Volumes cannot be moved directly from one robotic volume group to another robotic volume group. The intermediate steps (some volume entries are changed, some are not) would cause a conflict with robot numbers. Choose a different volume group on the request, or let the volume group be selected automatically. Volume group selection depends on the specific interface being used.