Veritas NetBackup™ 5330 Appliance Product Description
- NetBackup 5330 Appliance overview
- About the NetBackup 5330 Appliance
- NetBackup 5330 Appliance system features
- Serial number locations
- NetBackup 5330 Appliance compute node disk drive configurations
- NetBackup 5330 Appliance compute node control panel information
- About the NetBackup 5330 Appliance compute node rear panel
- NetBackup 5330 Appliance compute node PCIe slot I/O configuration options
- NetBackup 5330 Appliance compute node Ethernet port configurations
- Dual-port 10 Gb Ethernet card with SFP+ transceiver ports
- Dual-port 8 Gb Fibre Channel Host Bus Adapter (FC HBA) specifications
- About NetBackup 5330 Appliance storage shelves
- Best practices for rack installation
- NetBackup 5330 Appliance cables
- Appendix A. Technical specifications, standards, and compliance information
- Index
Power cables
The AC power modules of the appliance and the storage shelves accept one AC power cable. One end of the AC power cable is connected to the power supply on the appliance or the storage device. The other end of the cable is connected to an external Power Distribution Unit (PDU) on the rack.
A power cable includes live line, neutral line, and grounding lines.
A | AC power connector (IEC-60320-C14) to an external Power Supply Distribution Unit (PDU) on a rack. |
B | AC power connector (IEC-60320-C13) to an appliance or a storage device. |
Note:
If your power distribution unit is not compatible with the IEC-60320-C13 plug, then Veritas recommends that you purchase your power cable locally. Make sure the power cable meets or exceeds the indicated power rating.
See NetBackup 5330 Appliance system technical specifications.