Veritas™ 5250 Appliance Product Description Guide
- About the Veritas 5250 Appliance
- Veritas 5250 Appliance overview
- Features and components of the Veritas 5250 Appliance
- Locating the appliance serial number
- Veritas 5250 Appliance front panel disk drive configurations
- About the Veritas 5250 Appliance front panel USB port
- About the 5250 Appliance control panel
- About the 5250 Appliance rear panel
- Veritas 5250 Appliance I/O configuration options
- Veritas 5250 Appliance total I/O on-board and PCIe ports
- Available I/O configurations by slot for Veritas 5250 Appliance installations
- QLE2692 dual-port 16Gb Fibre Channel host bus adapter
- Mellanox ConnectX-4 Lx EN MCX4121A-ACAT Ethernet card
- Broadcom P225p 10/25Gb PCIe Ethernet card
- Intel X550-T2 dual-port 10Gb Ethernet card
- Intel RAID Adapter RS3P4MF088F
- Veritas 2U12 65.5TiB/72TB Storage Shelf
- Storage Shelf overview
- Usable appliance storage capacities
- Components of the S Series Storage Shelf
- S Series Storage Shelf front panel components
- S Series Storage Shelf control panel
- S Series Storage Shelf rear components
- S Series Storage Shelf I/O modules
- S Series I/O module Status LED location and conditions
- S Series I/O module SAS Activity LED location and conditions
- S Series Storage Shelf Power Cooling Modules
- S Series Power Cooling Module LEDs
- Components of the D Series Storage Shelf
- Veritas 5250 Appliance and Veritas 2U12 65.5TiB/72TB Storage Shelf cables
- Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
- Veritas 5250 Appliance technical specifications
- Veritas S Series 2U12 65.5TiB/72TB Storage Shelf technical specifications
- Veritas D Series 2U12 65.5TiB/72TB Storage Shelf technical specifications
- Environmental specifications
- Protocol standards
- Regulatory, compliance, and certification information
- Product regulatory compliance
- Country approvals
- Product safety compliance
- Product EMC Compliance - Class A Compliance
- Product environmental compliance
- Index
QLE2692 dual-port 16Gb Fibre Channel host bus adapter
The QLE2692 dual-port 16Gb Fibre Channel (FC) host bus adapter is used for optimized deduplication over Fibre Channel, tape library connectivity, or Fibre Transport Media Server (FTMS) mode.
Table: QLE2692 dual-port 16Gb Fibre Channel host bus adapter specifications
Item | Description | ||||
|---|---|---|---|---|---|
Bracket height | Full Height | ||||
Form factor | Low-profile PCIe card (6.6 inches × 2.731 inches) | ||||
Power consumption (watts) | 9.3 W | ||||
Operating temperature | 0°C to 55°C (32°F to 131°F) | ||||
Storage temperature | - 20°C to 70°C ( - 4°F to 158°F) | ||||
Operating humidity | 10% to 90% | ||||
Storage humidity | 5% to 95% | ||||
System interface type | PCIe v3.0 | ||||
Certifications | UL, CSA, TUV, CB, FCC, VCCI | ||||
Maximum cable distances | Rate | Cable and Distance (m) (multimode optic cable) | |||
OM1 | OM2 | OM3 | OM4 | ||
4Gbps | 70 | 150 | 380 | 400 | |
8Gbps | 21 | 50 | 150 | 190 | |
16Gbps | * | 35 | 100 | 125 | |
* Not supported | |||||
The following table describes the Fibre Channel host bus adapter LED indicator status activity.
Table: QLE2692 dual-port 16Gb Fibre Channel host bus adapter LED indicator status activity
Yellow LED | Green LED | Amber LED | Activity |
|---|---|---|---|
Off | Off | Off | Power off |
On | On | On | Power on (pre-firmware initialization) |
Blink | Blink | Blink | Power on (post-firmware initialization ) |
Blink alternately | Blink alternately | Blink alternately | Firmware error |
Off | Off | On/Blink | 4Gbps link / input-output (I/O) activity |
Off | On/Blink | Off | 8Gbps link / input-output (I/O) activity |
On/Blink | Off | Off | 16Gbps link / input-output (I/O) activity |
To purchase a QLE2692 dual-port 16Gb Fibre Channel host bus adapter for your appliance, contact your Veritas sales representative, or your Veritas Partner representative.
QLE2692 dual-port 16Gb Fibre Channel host bus adapter | |
SKU Number | Description |
19441 | QLOGIC 16Gb Fibre Channel host bus adapter |