Veritas Access Appliance Command Reference Guide

Last Published:
Product(s): Appliances (7.4.3)
Platform: Veritas 3340,Access Appliance OS
  1. Overview
    1.  
      Scope of the Veritas Access Command Reference Guide
    2.  
      Where to find the documentation
    3.  
      Using the Access Appliance shell menu
  2. Appendix A. Main > Appliance
    1.  
      Appliance > Status
  3. Appendix B. Main > Manage > Cluster
    1.  
      Cluster > Configure
  4. Appendix C. Main > Manage > Software
    1.  
      Manage > Software > Cancel
    2.  
      Manage > Software > Delete
    3.  
      Manage > Software > Download
    4.  
      Manage > Software > DownloadProgress
    5.  
      Manage > Software > Install
    6.  
      Manage > Software > List
    7.  
      Manage > Software > Readme
    8.  
      Manage > Software > Rollback
    9.  
      Manage > Software > Share
    10.  
      Manage > Software > UpgradeStatus
  5. Appendix D. Main > Manage > Storage
    1.  
      Manage > Storage > Show
    2.  
      Manage > Storage > Scan
    3.  
      Manage > Storage > Erase
  6. Appendix E. Main > Monitor
    1.  
      Monitor > Beacon
    2.  
      Monitor > MemoryStatus
    3.  
      Monitor > NetworkStatus
    4.  
      Monitor > SDCS
    5.  
      Monitor > Top
    6.  
      Monitor > Uptime
    7.  
      Monitor > Who
    8.  
      Monitor > Hardware
  7. Appendix F. Main > Network
    1.  
      Network > Configure
    2.  
      Network > Date
    3.  
      Network > DNS
    4.  
      Network > Gateway
    5.  
      Network > Hostname
    6.  
      Network > Hosts
    7.  
      Network > IPv4
    8.  
      Network > IPv6
    9.  
      Network > NetStat
    10.  
      Network > NTPServer
    11.  
      Network > Ping
    12.  
      Network > Proxy
    13.  
      Network > SetProperty
    14.  
      Network > Show
    15.  
      Network > TimeZone
    16.  
      Network > TraceRoute
    17.  
      Network > Unconfigure
  8. Appendix G. Main > Settings
    1.  
      Settings > Password
    2.  
      Settings > Alerts > CallHome
    3.  
      Settings > Alerts > Email
    4.  
      Settings > Alerts > Hardware
    5.  
      Settings > Alerts > SNMP
    6.  
      Settings > LogForwarding
    7.  
      Security > Certificates > DeviceCertificate > Export
    8.  
      Security > Certificates > DeviceCertificate > Import
  9. Appendix H. Main > Support
    1.  
      Support > Cleanup > ResetDIMMErrors
    2.  
      Support > Collect
    3.  
      Support > DataCollect
    4.  
      Support > FactoryReset
    5.  
      Support > InfraServices
    6.  
      Support > IPMI
    7.  
      Support > LogBrowser
    8.  
      Support > Logs
    9.  
      Support > Maintenance
    10.  
      Support > RAID
    11.  
      Support > Reboot
    12.  
      Support > Services
    13.  
      Support > Shutdown
    14.  
      Support > Storage Reset
    15.  
      Support > Test

Name

Main > Support > Cleanup > ResetDIMMErrors — Resets the uncorrectable error count of specific failed DIMMs (dual in-line memory modules) to zero.

SYNOPSIS

ResetDIMMErrors

DESCRIPTION

You might need to run this command after a failed DIMM has been replaced. Use this command if after replacing some DIMMs the uncorrectable error count is not reset (to zero) automatically.

After replacing a DIMM, you can verify the uncorrectable error count by running the Monitor > Hardware ShowHealth Appliance DIMM command.

Note:

Ensure that you contact the Technical Support before you run this command.

OPTIONS

ResetDIMMErrors

After the failed DIMMs have been replaced, this command might be needed to reset the uncorrectable error count of the specific DIMMs. By default, the command resets the uncorrectable error count of all the failed DIMMs that are shown in the output. You can specify specific IDs to reset the uncorrectable error count for specific failed DIMMs.

If alerts are configured for the appliance, after the uncorrectable error count is reset, you will receive one or more alerts indicating that the DIMM error is resolved.

EXAMPLES

The following example shows the sample output that is displayed when you run the Support > Cleanup > ResetDIMMErrorscommand:

Showing the DIMMs (dual in-line memory modules) with a failed state:
+------------|-------------+------------+--------|--------+----|----+-----+-------------|------+
|IDName      |Status       |Manufacturer|Part    |Serial  |Type|Size|Speed|Uncorrectable|State |
|            |             |            |Number  |Number  |    |    |     |Error Count  |      |
+------------|-------------|------------+--------+--------+----+----+-----|-------------+------|
|CPU1 Channel|Uncorrectable|  Samsung   |M393A1G4|313C62CB DDR4|8192|2133 |   2         |Failed|      |
 A Slot 1    |Error        |            |0DB0-CPB|        |    | MB |MHz  |             |      |    
+------------|-------------+------------|--------|--------|---------|-----+-------------+------+ 
|CPU1 Channel|Uncorrectable|  Samsung   |M393A1G4|313C53CA|DDR4|8192|2133 |   2         |Failed|      |
 A Slot 2    |Error        |            |0DB0-CPB|        |    | MB |MHz  |             |      |
+------------|-------------+------------|--------|--------|----|----|-----|-------------+------+

To reset the uncorrectable error count of specific DIMMs from the table,
enter the IDs separated by commas. To reset the uncorrectable error count for 
all the DIMMs shown in the table, type all(default): CPU1 Channel A Slot1,
CPU1 Channel A Slot 2

Are you sure you want to reset the uncorrectable error count for
CPU1 Channel A Slot1, and CPU1 Channel A Slot2?[yes, no](no): yes
The reset has been initiated. It may take some time to complete. 
If alerts are configured, you will receive one or more alerts indicating that 
the DIMM error is resolved.

Showing the DIMMs (dual in-line memory modules) with a failed state:
+------------|-------------+------------+--------|--------+----|----+-----+-------------|------+
|ID          |Status       |Manufacturer|Part    |Serial  |Type|Size|Speed|Uncorrectable|State |
|            |             |            |Number  |Number  |    |    |     |Error Count  |      |
+------------|-------------|------------+--------+--------+----+----+-----|-------------+------|
|CPU1 Channel|Uncorrectable|  Samsung   |M393A1G4|313C62CB|DDR4|32  |2400 | 1           |Failed|      
|A Slot 1    |Error        |            |0DB0-CPB|        |    |GB  |MT/s |             |      |    
+------------|-------------+------------|--------|--------|---------|-----+-------------+------+ 


Are you sure you want to reset the uncorrectable error count for
CPU1 Channel A Slot 1?[yes, no](no):yes
The reset has been initiated. It may take some time to complete.
If alerts are configured, you will receive one or more alerts indicating that 
the DIMM error is resolved.