Cluster Server 7.3.1 Bundled Agents Reference Guide - Linux
- Introducing Bundled agents
- Storage agents
- DiskGroup agent
- DiskGroupSnap agent
- Notes for DiskGroupSnap agent
- Sample configurations for DiskGroupSnap agent
- Volume agent
- VolumeSet agent
- Sample configurations for VolumeSet agent
- LVMLogicalVolume agent
- LVMVolumeGroup agent
- Sample configurations for LVMVolumeGroup agent
- Mount agent
- Sample configurations for Mount agent
- VMwareDisks agent
- SFCache agent
- AWS EBSVol agent
- AzureDisk agent
- Network agents
- About the network agents
- IP agent
- NIC agent
- Notes for the NIC agent
- Sample configurations for NIC agent
- IPMultiNIC agent
- MultiNICA agent
- IP Conservation Mode (ICM) for MultiNICA agent
- Performance Mode (PM) for MultiNICA agent
- Sample configurations for MultiNICA agent
- DNS agent
- Agent notes for DNS agent
- About using the VCS DNS agent on UNIX with a secure Windows DNS server
- Sample configurations for DNS agent
- AWSIP agent
- AWSRoute53 agent
- AzureIP agent
- AzureDNSZone agent
- File share agents
- NFS agent
- NFSRestart agent
- Share agent
- About the Samba agents
- SambaServer agent
- SambaShare agent
- NetBios agent
- Service and application agents
- Apache HTTP server agent
- Application agent
- Notes for Application agent
- Sample configurations for Application agent
- CoordPoint agent
- KVMGuest agent
- Notes for KVMGuest agent
- Sample configurations for KVMGuest environment
- Sample configurations for RHEV environment
- Process agent
- Usage notes for Process agent
- Sample configurations for Process agent
- ProcessOnOnly agent
- AzureAuth agent
- Infrastructure and support agents
- Testing agents
- Replication agents
- RVG agent
- RVGPrimary agent
- RVGSnapshot
- RVGShared agent
- RVGLogowner agent
- RVGSharedPri agent
- VFRJob agent
- Dependencies for VFRJob agent
- Notes for the VFRJob agent
Phantom agent
The agent enables VCS to determine the status of parallel service groups that do not include OnOff resources, which are resources that VCS can start and stop. Without the "dummy" resource provided by this agent, VCS cannot assess the status of groups that only contain None (Persistent) and OnOnly resources because the state of these resources is not considered in the process of determining whether a group is online. Refer to the VCS Administrator's Guide for information on categories of service groups and resources.
Do not use the Phantom resource in failover service groups.
Also, the Phantom resource should not be used in service groups that don't contain any resources.
Note:
Do not attempt manual online or offline operations on the Phantom resource at the resource level. Do not use hares commands on the Phantom resource at the resource level. Unpredictable behavior results when you try a manual online or offline procedure or an hares command on a Phantom resource. You can perform commands on the service group that contains the Phantom resource.