NetBackup™ Security and Encryption Guide

Last Published:
Product(s): NetBackup (10.0)
  1. Read this first for secure communications in NetBackup
    1.  
      About secure communication in NetBackup
    2.  
      How NetBackup CA-signed certificates (or host ID-based certificates) are deployed during installation
    3.  
      How secure communication works with master server cluster nodes
    4.  
      About NetBackup clients installed on nodes of a clustered application
    5.  
      How NetBackup certificates are deployed on hosts during upgrades
    6.  
      When an authorization token is required during certificate deployment
    7.  
      Why do you need to map host names (or IP addresses) to host IDs
    8.  
      How to reset host attributes or host communication status
    9.  
      What has changed for catalog recovery
    10.  
      What has changed with Auto Image Replication
    11.  
      How the hosts with revoked certificates work
    12.  
      Are NetBackup certificates backed up
    13.  
      Can you configure external certificates for master server
    14.  
      How secure communication works with master server cluster nodes using external certificates
    15.  
      How revocation lists work for external certificates
    16.  
      How communication happens when a host cannot directly connect to the master server
    17.  
      How NetBackup 8.1 or later hosts communicate with NetBackup 8.0 and earlier hosts
    18.  
      How communication with legacy media servers happens in the case of cloud configuration
    19. Communication failure scenarios
      1.  
        Failure during communication with 8.0 or earlier hosts
      2.  
        Catalog backup failure
    20.  
      Secure communication support for other hosts in NetBackup domain
    21.  
      Communication between NetBackup 8.1 or later master server and OpsCenter server
    22.  
      Secure communication support for BMR
    23.  
      Configuration for VMware backups that protect SQL Server and backups with SQL Servers that use multiple NICs
  2. Increasing NetBackup security
    1.  
      About NetBackup security and encryption
    2.  
      NetBackup security implementation levels
    3.  
      World-level security
    4.  
      Enterprise-level security
    5.  
      Datacenter-level security overview
    6.  
      NetBackup Access Control (NBAC)
    7.  
      Combined world, enterprise, and data center levels
    8.  
      NetBackup security implementation types
    9.  
      Operating system security
    10.  
      NetBackup security vulnerabilities
    11.  
      Standard NetBackup security
    12.  
      Client side encryption security
    13.  
      NBAC on master, media server, and graphical user interface security
    14.  
      NBAC complete security
  3. Security deployment models
    1.  
      Workgroups
    2.  
      Single datacenters
    3.  
      Multi-datacenters
    4.  
      Workgroup with NetBackup
    5.  
      Single datacenter with standard NetBackup
    6.  
      Single datacenter with client side encryption
    7.  
      Single datacenter with NBAC on master and media servers
    8.  
      Single datacenter with NBAC complete
    9.  
      Multi-datacenter with standard NetBackup
    10.  
      Multi-datacenter with client side encryption
    11.  
      Multi-datacenter with NBAC on master and media servers
    12.  
      Multi-datacenter with NBAC complete
  4. Auditing NetBackup operations
    1.  
      About NetBackup auditing
    2.  
      Viewing the current audit settings
    3. About audit events
      1.  
        Viewing audit events
      2.  
        Audit Events tab
      3.  
        Viewing audit event details
      4.  
        Audit Events Details dialog box
      5.  
        Viewing audit event status
      6.  
        Troubleshooting auditing issues related to the Access History tab
    4.  
      Audit retention period and catalog backups of audit records
    5.  
      Viewing the detailed NetBackup audit report
    6.  
      User identity in the audit report
    7.  
      Disabling auditing
    8.  
      Audit alert notification for audit failures (NetBackup Administration Console)
    9.  
      Send audit events to system logs
  5. Section I. Identity and access management
    1. About identity and access management
      1.  
        About access control in NetBackup
    2. AD and LDAP domains
      1.  
        Adding AD or LDAP domains in NetBackup
      2.  
        Troubleshooting AD or LDAP domain configuration issues
      3.  
        Certificate authorities trusted by the NetBackup Authentication Service
    3. Access keys
      1.  
        Access keys
      2.  
        Access codes
      3.  
        Get CLI access through web UI authentication
      4.  
        Approve your CLI access request
      5.  
        Approve CLI access requests of other users
      6.  
        Edit access settings
    4. API keys
      1.  
        About API keys
      2.  
        Creating API keys
      3.  
        Managing an API key
      4. Using an API key
        1.  
          Setting an API key environment variable to run NetBackup commands
    5. Auth.conf file
      1.  
        Authorization file (auth.conf) characteristics
    6. Role-based access control
      1.  
        RBAC features
      2.  
        RBAC settings
      3.  
        Disable web UI access for Operating System Administrator
      4.  
        Disable CLI access for Operating System Administrator
      5.  
        Configuring RBAC
      6.  
        Add AD or LDAP domains
      7.  
        Default RBAC roles
      8.  
        Administrator
      9.  
        Default Cloud Administrator
      10.  
        Default NetBackup Command Line (CLI) Administrator
      11.  
        Default Kubernetes Administrator
      12.  
        Default NetBackup Kubernetes Operator Service
      13.  
        Default Oracle Administrator
      14.  
        Default Microsoft SQL Server Administrator
      15.  
        Default Resiliency Administrator
      16.  
        Default RHV Administrator
      17.  
        Default SaaS Administrator
      18.  
        Default AHV Administrator
      19.  
        Default Security Administrator
      20.  
        Default Storage Administrator
      21.  
        Default Universal Share Administrator
      22.  
        Default VMware Administrator
      23.  
        Add a custom RBAC role
      24.  
        Edit or remove a role a custom role
      25.  
        View users in RBAC
      26.  
        Add a user to a role (non-SAML)
      27.  
        Add a user to a role (non-SAML, smart card user without AD or LDAP domain association or mapping)
      28.  
        Add a user to a role (SAML)
      29.  
        Remove a user from a role
    7. Smart card or digital certificate
      1.  
        Configure user authentication with smart cards or digital certificates
      2.  
        Configure smart card authentication with domain
      3.  
        Configure smart card authentication without domain
      4.  
        Edit the configuration for smart card authentication
      5.  
        Add or delete a CA certificate that is used for smart card authentication
      6.  
        Disable or temporarily disable smart card authentication
    8. Single Sign-On (SSO)
      1.  
        About Single Sign-On (SSO) configuration
      2. Configure NetBackup for Single Sign-On (SSO)
        1.  
          Configure the SAML KeyStore
        2.  
          Configure the SAML keystore and add and enable the IDP configuration
        3.  
          Enroll the NetBackup primary server with the IDP
        4.  
          Manage an IDP configuration
    9. Enhanced Auditing
      1.  
        About Enhanced Auditing
      2.  
        Enabling Enhanced Auditing
      3. Configuring Enhanced Auditing
        1.  
          Connecting to a media server with Enhanced Auditing
        2.  
          Changing a server across NetBackup domains
        3.  
          Configuration requirements if using Change Server with NBAC or Enhanced Auditing
      4.  
        Disabling Enhanced Auditing
      5.  
        Managing users with Enhanced Auditing
      6.  
        User authentication with Enhanced Auditing
      7.  
        Impact of Enhanced Auditing on NetBackup Administration Console authorization
    10. NetBackup Access Control Security (NBAC)
      1.  
        About using NetBackup Access Control (NBAC)
      2.  
        NetBackup access management administration
      3.  
        About NetBackup Access Control (NBAC) configuration
      4. Configuring NetBackup Access Control (NBAC)
        1.  
          NBAC configuration overview
        2.  
          Configuring NetBackup Access Control (NBAC) on standalone master servers
        3.  
          Installing the NetBackup master server highly available on a cluster
        4.  
          Configuring NetBackup Access Control (NBAC) on a clustered master server
        5.  
          Configuring NetBackup Access Control (NBAC) on media servers
        6.  
          Installing and configuring access control on clients
        7.  
          About including authentication and authorization databases in the NetBackup hot catalog backups
        8.  
          NBAC configure commands summary
        9.  
          Unifying NetBackup Management infrastructures with the setuptrust command
        10.  
          Using the setuptrust command
      5. Configuring Access Control host properties for the master and media server
        1.  
          Authentication Domain tab
        2.  
          Authorization Service tab
        3.  
          Network Attributes tab
      6. Access Control host properties dialog for the client
        1.  
          Authentication Domain tab for the client
        2.  
          Network Attributes tab for the client
      7.  
        Using NetBackup Access Control (NBAC) with Auto Image Replication
      8. Troubleshooting Access Management
        1.  
          Troubleshooting NBAC issues
        2.  
          Configuration and troubleshooting tips for NetBackup Authentication and Authorization
        3. Windows verification points
          1.  
            Master server verification points for Windows
          2.  
            Media server verification points for Windows
          3.  
            Client verification points for Windows
        4. UNIX verification points
          1.  
            UNIX master server verification
          2.  
            UNIX media server verification
          3.  
            UNIX client verification
        5. Verification points in a mixed environment with a UNIX master server
          1.  
            Master server verification points for a mixed UNIX master server
          2.  
            Media server verification points for a mixed UNIX master server
          3.  
            Client verification points for a mixed UNIX master server
        6. Verification points in a mixed environment with a Windows master server
          1.  
            Master server verification points for a mixed Windows master server
          2.  
            Media server verification points for a mixed Windows master server
          3.  
            Client verification points for a mixed Windows master server
        7.  
          About the nbac_cron utility
        8.  
          Using the nbac_cron utility
      9.  
        Using the Access Management utility
      10. About determining who can access NetBackup
        1.  
          Individual users
        2.  
          User groups
        3.  
          NetBackup default user groups
        4. Configuring user groups
          1.  
            Creating a new user group
          2.  
            Creating a new user group by copying an existing user group
          3.  
            Renaming a user group
          4.  
            Adding a new user to the user group
        5. About defining a user group and users
          1.  
            Logging on as a new user
          2.  
            Assigning a user to a user group
          3.  
            About authorization objects and permissions
      11. Viewing specific user permissions for NetBackup user groups
        1.  
          Granting permissions
        2.  
          Authorization objects
        3.  
          Media authorization object permissions
        4.  
          Policy authorization object permissions
        5.  
          Drive authorization object permissions
        6.  
          Report authorization object permissions
        7.  
          NBU_Catalog authorization object permissions
        8.  
          Robot authorization object permissions
        9.  
          Storage unit authorization object permissions
        10.  
          DiskPool authorization object permissions
        11.  
          BUAndRest authorization object permissions
        12.  
          Job authorization object permissions
        13.  
          Service authorization object permissions
        14.  
          HostProperties authorization object permissions
        15.  
          License authorization object permissions
        16.  
          Volume group authorization object permissions
        17.  
          VolumePool authorization object permissions
        18.  
          DevHost authorization object permissions
        19.  
          Security authorization object permissions
        20.  
          Fat server authorization object permissions
        21.  
          Fat client authorization object permissions
        22.  
          Vault authorization object permissions
        23.  
          Server group authorization object permissions
        24.  
          Key management system (kms) group authorization object permissions
      12.  
        Upgrading NetBackup Access Control (NBAC)
  6. Section II. Encryption of data-in-transit
    1. NetBackup CA and NetBackup certificates
      1.  
        Overview of security certificates in NetBackup
      2.  
        About secure communication in NetBackup
      3. About the Security Management utilities
        1.  
          About login activity
      4. About host management
        1.  
          Hosts tab
        2.  
          Adding host ID to host name mappings
        3.  
          Add or Remove Host Mappings dialog box
        4.  
          Removing host ID to host name mappings
        5.  
          Mappings for Approval tab
        6.  
          Viewing auto-discovered mappings
        7.  
          Mapping Details dialog box
        8.  
          Approving host ID to host name mappings
        9.  
          Rejecting host ID to host name mappings
        10. Adding shared or cluster mappings
          1.  
            About shared or cluster mapping scenarios
        11.  
          Add Shared or Cluster Mappings dialog box
        12.  
          Resetting NetBackup host attributes
        13. Allowing or disallowing automatic certificate reissue
          1.  
            Configuring validity of the autoreissue parameter for a host
        14.  
          Adding or deleting comment for a host
      5. About global security settings
        1.  
          About secure communication settings
        2.  
          Disabling insecure communication
        3.  
          About insecure communication with 8.0 and earlier hosts
        4.  
          About communication with 8.0 or earlier host in multiple NetBackup domains
        5.  
          Automatically mapping host ID to host names and IP addresses
        6.  
          About disaster recovery settings
        7.  
          Setting a passphrase to encrypt disaster recovery packages
        8.  
          Disaster recovery packages
      6. About host name-based certificates
        1.  
          Deploying host name-based certificates
      7. About host ID-based certificates
        1.  
          Web login requirements for nbcertcmd command options
        2. Using the Certificate Management utility to issue and deploy host ID-based certificates
          1.  
            Viewing host ID-based certificate details
        3. About NetBackup certificate deployment security levels
          1.  
            Configuring the certificate deployment security levels
        4.  
          Automatic host ID-based certificate deployment
        5.  
          Deploying host ID-based certificates
        6.  
          Deploying host ID-based certificates in an asynchronous manner
        7.  
          Implication of clock skew on certificate validity
        8. Setting up trust with the master server (Certificate Authority)
          1.  
            Finding and communicating the fingerprint of the certificate authority
        9.  
          Forcing or overwriting certificate deployment
        10.  
          Retaining host ID-based certificates when reinstalling NetBackup on non-master hosts
        11.  
          Deploying certificates on a client that has no connectivity with the master server
        12.  
          About host ID-based certificate expiration and renewal
        13.  
          Deleting sensitive certificates and keys from media servers and clients
        14.  
          Cleaning host ID-based certificate information from a host before cloning a virtual machine
        15. About reissuing host ID-based certificates
          1.  
            Creating a reissue token
          2.  
            Changing the key pair for a host
      8. About Token Management for host ID-based certificates
        1.  
          Creating authorization tokens
        2.  
          Deleting authorization tokens
        3.  
          Viewing authorization token details
        4.  
          About expired authorization tokens and cleanup
      9. About the host ID-based certificate revocation list
        1.  
          Refreshing the CRL on the master server
        2.  
          Refreshing the CRL on a NetBackup host
      10. About revoking host ID-based certificates
        1.  
          Removing trust between a host and a master server
        2.  
          Revoking a host ID-based certificate
        3.  
          Determining a NetBackup host's certificate state
        4.  
          Getting a list of NetBackup hosts that have revoked certificates
      11.  
        Deleting host ID-based certificates
      12. Host ID-based certificate deployment in a clustered setup
        1. About deployment of a host ID-based certificate on a clustered NetBackup host
          1.  
            Host ID-based certificate deployment on the active master server node
          2.  
            Host ID-based certificate deployment on inactive master server nodes
        2.  
          Deploying host ID-based certificates on cluster nodes
        3.  
          Revoking a host ID-based certificate for a clustered NetBackup setup
        4.  
          Deploying a host ID-based certificate on a clustered NetBackup setup using reissue token
        5.  
          Creating a reissue token for a clustered NetBackup setup
        6.  
          Renewing a host ID-based certificate on a clustered NetBackup setup
        7.  
          Viewing certificate details of a clustered NetBackup setup
        8.  
          Removing CA certificates from a clustered NetBackup setup
        9.  
          Generating a certificate on a clustered master server after disaster recovery installation
      13.  
        About the communication between a NetBackup client located in a demilitarized zone and a master server through an HTTP tunnel
      14.  
        Adding a NetBackup host manually
      15. Migrating NetBackup CA
        1.  
          Setting the required key strength before installation or upgrade using the NB_KEYSIZE environment variable
        2.  
          Migrating NetBackup CA when the entire NetBackup domain is upgraded
        3.  
          Manually migrating NetBackup CA after installation or upgrade
        4.  
          Establishing communication with clients that do not have new CA certificates after CA migration
        5.  
          Viewing a list of NetBackup CAs in the domain
        6.  
          Viewing the CA migration summary
        7.  
          Decommissioning the inactive NetBackup CA
    2. Configuring data-in-transit encryption (DTE)
      1.  
        About the data channel
      2.  
        Data-in-transit encryption support
      3.  
        Workflow to configure data-in-transit encryption
      4.  
        Configure the global data-in-transit encryption setting
      5. Configure the DTE mode on a client
        1.  
          DTE_CLIENT_MODE for clients
      6.  
        View the DTE mode of a NetBackup job
      7.  
        View the DTE-specific attributes of a NetBackup image and an image copy
      8.  
        Configure the DTE mode on the media server
      9. Modify the DTE mode on a backup image
        1.  
          DTE_IGNORE_IMAGE_MODE for NetBackup servers
      10.  
        Media device selection (MDS) and resource allocation
      11. How DTE configuration settings work in various NetBackup operations
        1.  
          Backup
        2.  
          Restore
        3.  
          MSDP backup and restore
        4.  
          Universal-Share policy backup
        5.  
          Catalog backup and recovery
        6.  
          Duplication
        7.  
          Synthetic backup
        8.  
          Verify
        9.  
          Import
        10.  
          Replication
    3. External CA and external certificates
      1. About external CA support in NetBackup
        1.  
          Command-line options used for external certificate configuration
      2.  
        Workflow to use external certificates for NetBackup host communication
      3. Configuration options for external CA-signed certificates
        1. ECA_CERT_PATH for NetBackup servers and clients
          1.  
            Specifying Windows certificate store for ECA_CERT_PATH
        2.  
          ECA_TRUST_STORE_PATH for NetBackup servers and clients
        3.  
          ECA_PRIVATE_KEY_PATH for NetBackup servers and clients
        4.  
          ECA_KEY_PASSPHRASEFILE for NetBackup servers and clients
        5.  
          ECA_CRL_CHECK for NetBackup servers and clients
        6.  
          ECA_CRL_PATH for NetBackup servers and clients
        7.  
          ECA_CRL_PATH_SYNC_HOURS for NetBackup servers and clients
        8.  
          ECA_CRL_REFRESH_HOURS for NetBackup servers and clients
        9.  
          ECA_DISABLE_AUTO_ENROLLMENT for NetBackup servers and clients
        10.  
          ECA_DR_BKUP_WIN_CERT_STORE for NetBackup servers and clients
        11.  
          MANAGE_WIN_CERT_STORE_PRIVATE_KEY option for NetBackup master servers
      4.  
        Limitations of Windows Certificate Store support when NetBackup services are running in Local Service account context
      5. About certificate revocation lists for external CA
        1.  
          How CRLs from ECA_CRL_PATH are used
        2.  
          How CRLs from CDP URLs are used
      6. About certificate enrollment
        1.  
          About automatic enrollment of an external certificate
      7.  
        About viewing enrollment status of master servers
      8. Configuring an external certificate for the NetBackup web server
        1.  
          Updating or renewing external certificate for the web server
        2.  
          Removing the external certificate configured for the web server
      9.  
        Configuring the master server to use an external CA-signed certificate
      10.  
        Configuring a NetBackup host (media server, client, or cluster node) to use an external CA-signed certificate after installation
      11.  
        Enrolling an external certificate for a remote host
      12.  
        Viewing the certificate authorities that your NetBackup domain supports
      13.  
        Viewing external CA-signed certificates in the NetBackup web UI
      14.  
        Renewing a file-based external certificate
      15.  
        Removing certificate enrollment
      16.  
        Disabling the NetBackup CA in a NetBackup domain
      17.  
        Enabling the NetBackup CA in a NetBackup domain
      18.  
        Disabling an external CA in a NetBackup domain
      19.  
        Changing the subject name of an enrolled external certificate
      20. About external certificate configuration for a clustered master server
        1.  
          Workflow to use external certificates for a clustered master server
        2. Configuration options for external CA-signed certificates for a virtual name
          1.  
            CLUSTER_ECA_CERT_PATH for clustered primary server
          2.  
            CLUSTER_ECA_TRUST_STORE_PATH for clustered primary server
          3.  
            CLUSTER_ECA_PRIVATE_KEY_PATH for clustered primary server
          4.  
            CLUSTER_ECA_KEY_PASSPHRASEFILE for clustered primary server
        3.  
          Configuring an external certificate for a clustered master server
    4. Regenerating keys and certificates
      1.  
        About regenerating keys and certificates
      2.  
        Regenerating NetBackup authentication broker keys and certificates
      3.  
        Regenerating host identity keys and certificates
      4.  
        Regenerating web service keys and certificates
      5.  
        Regenerating nbcertservice keys and certificates
      6.  
        Regenerating tomcat keys and certificates
      7.  
        Regenerating JWT keys
      8.  
        Regenerating NetBackup gateway certificates
      9.  
        Regenerating web trust store certificates
      10.  
        Regenerating VMware vCenter plug-in certificates
      11.  
        Regenerating NetBackup Administrator Console session certificates
      12.  
        Regenerating OpsCenter keys and certificates
      13.  
        Regenerating NetBackup encryption key file
  7. Section III. Encryption of data at rest
    1. Data at rest encryption security
      1.  
        Data at rest encryption terminology
      2.  
        Data at rest encryption considerations
      3.  
        Destination types for encryption of data at rest
      4.  
        Encryption security questions to consider
      5.  
        Comparison of encryption options
      6. About NetBackup client encryption
        1.  
          Installation prerequisites for encryption security
        2. About running an encryption backup
          1.  
            About choosing encryption for a backup
          2.  
            Standard encryption backup process
          3.  
            Legacy encryption backup process
        3.  
          NetBackup standard encryption restore process
        4.  
          NetBackup legacy encryption restore process
      7. Configuring standard encryption on clients
        1.  
          Managing standard encryption configuration options
        2.  
          Managing the NetBackup encryption key file
        3. About configuring standard encryption from the server
          1.  
            About creating encryption key files on the clients
          2.  
            Creating the key files
          3.  
            Best practices for key file restoration
          4.  
            Manual retention to protect key file pass phrases
          5.  
            Automatic backup of the key file
        4.  
          Restoring an encrypted backup file to another client
        5.  
          About configuring standard encryption directly on clients
        6.  
          Setting standard encryption attribute in policies
        7.  
          Changing the client encryption settings from the NetBackup server
      8. Configuring legacy encryption on clients
        1. About configuring legacy encryption from the client
          1.  
            Managing legacy encryption key files
        2. About configuring legacy encryption from the server
          1.  
            About pushing the legacy encryption configuration to clients
          2.  
            About pushing the legacy encryption pass phrases to clients
        3.  
          Restoring a legacy encrypted backup created on another client
        4.  
          About setting legacy encryption attribute in policies
        5.  
          Changing client legacy encryption settings from the server
        6. Additional legacy key file security for UNIX clients
          1.  
            Running the bpcd -keyfile command
          2.  
            Terminating bpcd on UNIX clients
    2. NetBackup key management service
      1. About FIPS enabled KMS
        1.  
          About Federal Information Processing Standards (FIPS)
      2. Installing KMS
        1.  
          Using KMS with NBAC
        2.  
          About installing KMS with HA clustering
        3.  
          Enabling the monitoring of the KMS service
        4.  
          Disabling the monitoring of the KMS service
      3. Configuring KMS
        1.  
          Creating the key database
        2. About key groups and key records
          1.  
            About creating key groups
          2.  
            About creating key records
        3. Overview of key record states
          1.  
            Key record state considerations
          2.  
            Prelive key record state
          3.  
            Active key record state
          4.  
            Inactive key record state
          5.  
            Deprecated key record state
          6.  
            Terminated key record state
        4.  
          About backing up the KMS database files
        5.  
          About recovering KMS by restoring all data files
        6.  
          Recovering KMS by restoring only the KMS data file
        7.  
          Recovering KMS by regenerating the data encryption key
        8.  
          Problems backing up the KMS data files
        9.  
          Solutions for backing up the KMS data files
        10.  
          Creating a key record
        11.  
          Listing keys from a key group
        12. Configuring NetBackup to work with KMS
          1.  
            NetBackup and key records from KMS
          2.  
            Example of setting up NetBackup to use tape encryption
        13.  
          Configuring NetBackup KMS using the KMS web application
      4. About using KMS for encryption
        1.  
          About importing KMS encrypted images
        2.  
          Example of running an encrypted tape backup
        3.  
          Example of verifying an encryption backup
      5. KMS database constituents
        1.  
          Creating an empty KMS database
        2.  
          Importance of the KPK ID and HMK ID
        3.  
          About periodically updating the HMK and KPK
        4.  
          Backing up the KMS keystore and administrator keys
      6. Command line interface (CLI) commands
        1.  
          CLI usage help
        2.  
          Create a new key group
        3.  
          Create a new key
        4.  
          Modify key group attributes
        5.  
          Modify key attributes
        6.  
          Get details of key groups
        7.  
          Get details of keys
        8.  
          Delete a key group
        9.  
          Delete a key
        10.  
          Recover a key
        11. About exporting and importing keys from the KMS database
          1. Exporting keys
            1.  
              Troubleshooting common errors during an export
          2. Importing keys
            1.  
              Troubleshooting common errors during an import
        12.  
          Modify host master key (HMK)
        13.  
          Get host master key (HMK) ID
        14.  
          Get key protection key (KPK) ID
        15.  
          Modify key protection key (KPK)
        16.  
          Get keystore statistics
        17.  
          Quiesce KMS database
        18.  
          Unquiesce KMS database
        19.  
          Key creation options
      7. Troubleshooting KMS
        1.  
          Solution for backups not encrypting
        2.  
          Solution for restores that do not decrypt
        3.  
          Troubleshooting example - backup with no active key record
        4.  
          Troubleshooting example - restore with an improper key record state
    3. External key management service
      1.  
        About external KMS
      2.  
        Certificate configuration and authorization
      3.  
        Workflow for external KMS configuration
      4.  
        Validating KMS credentials
      5. Configuring KMS credentials
        1.  
          Listing KMS credentials
        2.  
          Updating KMS credentials
        3.  
          Deleting KMS credentials
      6. Configuring KMS
        1.  
          Listing KMS configurations
        2.  
          Updating KMS configuration
        3.  
          Deleting KMS configuration
      7.  
        Configuring keys in an external KMS for NetBackup consumption
      8. Creating keys in an external KMS
        1.  
          Listing keys
      9.  
        Determining a key group name during storage configuration
      10. Working with multiple KMS servers
        1.  
          Migrating one KMS server to another KMS server
        2.  
          Using a separate KMS server for each storage configuration
      11.  
        Working with external KMS during backup and restore
      12.  
        Key rotation
      13.  
        Disaster recovery when catalog backup is encrypted using an external KMS server
      14.  
        Alerts for expiration of KMS credentials
  8. FIPS compliance in NetBackup
    1.  
      About FIPS
    2.  
      About FIPS support in NetBackup
    3.  
      Prerequisites
    4.  
      Specify entropy randomness in NetBackup
    5. Configure the FIPS mode in your NetBackup domain
      1.  
        Enable the FIPS mode on a NetBackup host
      2.  
        Enable the FIPS mode for the NetBackup Authentication Broker service
      3.  
        Enable FIPS mode for the NetBackup Administration Console
    6. Disable the FIPS mode for NetBackup
      1.  
        Disable FIPS mode for a NetBackup host
      2.  
        Disable FIPS mode for NetBackup Authentication broker (nbatd)
      3.  
        Disable the FIPS mode for the NetBackup Administration Console
    7.  
      NB_FIPS_MODE option for NetBackup servers and clients
    8.  
      USE_URANDOM for NetBackup servers and clients
  9. NetBackup web services account
    1.  
      About the NetBackup web services account
    2.  
      Changing the web service user account
  10. Running NetBackup services with non-privileged user (service user) account
    1. About a NetBackup service user account
      1.  
        Important considerations for using a service user account
    2.  
      Configuring a service user account
    3.  
      Changing a service user account after installation or upgrade
    4.  
      Giving access permissions to service user account on external paths
    5.  
      NetBackup services that run with the service user account
  11. Immutability and indelibility of data in NetBackup
    1.  
      About immutable and indelible data
    2.  
      Workflow to configure immutable and indelible data
    3.  
      Deleting an immutable image from storage using the bpexpdate command
    4.  
      Removing an immutable image from the catalog using the bpexpdate command
  12. Backup anomaly detection
    1. About backup anomaly detection
      1.  
        How a backup anomaly is detected
    2.  
      Detecting backup anomalies on the master server
    3.  
      Detecting backup anomalies on the media server
    4.  
      Configure anomaly detection settings
    5.  
      View anomalies
    6.  
      Anomaly configuration to enable automatic scanning
  13. Malware detection
    1.  
      About Malware detection
    2.  
      Workflow of malware detection and notification
    3.  
      Pre-requisite for scan host
    4.  
      Pre-requisites for scan host pool
    5.  
      Supported Malware tools and their configurations
    6. NetBackup Web UI Malware scanning workflow configuration
      1.  
        Configure a new scan host pool
      2.  
        Add a new host in a scan host pool
      3.  
        Add an existing scan host
      4.  
        Manage credentials
      5.  
        Remove the scan host
      6.  
        Deactivate the scan host
    7.  
      Perform Malware scanning
    8.  
      Recovery flow for malware scan
    9.  
      Malware scan timeout configuration for NetBackup server

Why do you need to map host names (or IP addresses) to host IDs

Hosts can be referenced with multiple names.

For example: In the case of multiple network interfaces or if hosts are referenced by both short names and Fully Qualified Domain Names (FQDN).

For successful secure communication in NetBackup 8.1 or later, you should map all associated host names to the respective host ID. The NetBackup-configured client name of a host (or the primary name) is automatically mapped to its host ID during certificate deployment. Additional host names are discovered during communication and may be automatically mapped to the respective host ID or may appear in the Mappings for Approval list. Perform this configuration in the Host Management properties on the master server.

See Adding host ID to host name mappings.

Examples of configurations that have multiple host names include:

  • If you have multiple network interfaces, a host has both a public and a private host name.

  • A host can have a short name and a fully qualified domain name (FQDN).

  • A host can be associated with its IP address.

  • For a file system or database that is clustered, a host is associated with its node name and the virtual name of the cluster.

Note the following:

  • The Exchange, SharePoint, and SQL Server agents also require that you configure host information in the Distributed Application Restore Mapping host properties on the master server.

  • For highly available environments, the SQL Server agent no longer requires a second policy that contains the cluster or AG node names. You also do not need to configure permissions for redirected restores for the cluster or AG nodes. For successful backups and restores of a SQL Server cluster or AG, you need only configure the mappings in the Host Management properties and the Distributed Application Restore Mapping host properties.

The following diagram illustrates the host ID-to-host name mapping process:

Host name-to-host ID mapping occurs in the following order:

  1. The FQDN of Host 2 is mapped to its host ID during certificate deployment.

  2. Host 1 initiates a secure connection to Host 2 using the short name. Both hosts exchange their NetBackup certificates as part of the TLS handshake.

  3. Host 1 sends the host ID and short name of Host 2 to the master server for validation.

  4. The master server looks up the host ID and the short name in its database. Since the provided short host name is not already mapped to the host ID of Host 2, one of the following occurs:

    • If the Automatically map host ID to host names option in the NetBackup Administration Console is selected and the short name is not already mapped to another host ID, the discovered short name is automatically mapped to the host ID of Host 2, and Host 1 is instructed to continue the connection.

    • If the Automatically map host ID to host names option is not selected or the short name is already mapped to another host ID, the discovered mapping is added to the pending approval list and Host 1 is instructed to drop the connection. The mapping should be manually approved before any connections to Host 2 using the same short name can succeed.

  5. Connection is established between the hosts if the mapping is approved. If the mapping is not approved, the connection is dropped.