InfoScale™ 9.0 SmartIO for Solid-State Drives Solutions Guide - Solaris

Last Published:
Product(s): InfoScale & Storage Foundation (9.0)
Platform: Solaris
  1. Introducing SFHA Solutions SmartIO
    1.  
      About SmartIO for solid-state drives
    2.  
      About SmartIO in an SFHA environment
    3.  
      About SmartIO in an Active/Active cluster environment
    4. About SmartIO in the Solaris virtualized environments
      1.  
        Performing live migration between LDOMs in the SmartIO environment
    5.  
      About the SmartIO caching profiler tool
  2. Using the SmartIO feature: use cases
    1. About SmartIO read caching for applications running on VxVM volumes
      1.  
        Required configuration for SmartIO read caching for VxVM volumes
      2.  
        Automatic caching for VxVM volumes
      3.  
        Setting up SmartIO read caching for VxVM volumes
      4.  
        Verifying the VxVM cache area and monitoring the caching
    2. About SmartIO read caching for applications running on VxFS file systems
      1.  
        Required configuration for SmartIO read caching for a VxFS file system
      2.  
        Automatic caching for VxFS file systems
      3.  
        Setting up SmartIO read caching for VxFS file systems
      4.  
        Verifying the VxFS cache area and monitoring the caching
      5.  
        Customizing the caching behavior
    3. About SmartIO caching on SSD devices exported by FSS
      1.  
        Status of cache areas when nodes leave or join the cluster
      2.  
        Setting up cache areas using SSDs exported by FSS
    4. About SmartIO write-back caching for applications running on VxFS file systems
      1.  
        Required configuration for SmartIO write-back caching for a VxFS file system
      2.  
        Setting up SmartIO write-back caching for VxFS file systems
      3.  
        Verifying the VxFS cache area and monitoring the caching (writeback mode)
    5. About multiple SmartIO cache areas for read and write-back caching on VxFS file systems
      1.  
        About the smartiocache option
      2.  
        Converting VxFS cache areas from one type to another
      3.  
        Setting up multiple cache areas on a system
      4.  
        Verifying the VxFS cache areas
    6. About SmartIO caching for Oracle databases on VxFS file systems
      1.  
        Prerequisites and configuration for using the SmartIO plug-in for Oracle
      2.  
        Setting default SmartIO caching policies for a database running on a VxFS file system
      3.  
        Setting SmartIO caching policies for database objects
      4.  
        Pinning and unpinning database objects
      5.  
        Enabling and disabling caching for the database
      6.  
        Listing cache policy details for the database
      7.  
        Listing cache statistics for the database
    7. About SmartIO caching for databases on VxVM volumes
      1.  
        Applying a SmartIO database caching template for a VxVM volume
  3. Administering SmartIO
    1.  
      Creating a cache area
    2.  
      Displaying information about a cache area
    3. Enabling or disabling caching for a data object
      1.  
        Enabling or disabling caching for a file system
      2.  
        Enabling or disabling caching for a data volume
    4.  
      Adding a device to the cache area
    5.  
      Pausing caching from a volume to a cache area
    6.  
      Removing a device from the cache area
    7.  
      Destroying a cache area
    8.  
      Setting the attributes of the VxVM cache area
    9.  
      Setting or changing the caching mode for a VxFS cache area
    10.  
      Flushing dirty data from a writeback cache area
    11.  
      Tuning the writeback caching
    12. Viewing the SmartIO cache statistics
      1.  
        Viewing the detailed caching stats for a VxVM cache area
      2.  
        Viewing the detailed caching stats for a VxFS cache area
  4. Troubleshooting and error handling
    1. Support for a persistent or 'warm' VxVM cache
      1.  
        Primary volume failure with a stale cache could cause possible data corruption
      2.  
        Migrating a cache during HA failover is not supported
    2.  
      Cache area is lost after a disk failure (3158482)
    3.  
      Cache is not online after a reboot
    4.  
      Recovering the write-back cache after a node failure
  5. Appendix A. Command reference
    1.  
      SmartIO command reference

Setting or changing the caching mode for a VxFS cache area

For a VxFS cache area, the caching mode determines what kind of caching is performed for the specified mount point. The mode can be nocache, read, or writeback. The default mode is read.

A VxVM cache area only supports read mode.

You cannot change the type (VxVM or VxFS) of a cache area. You must destroy the cache area and create a new cache area of the required type.

You can set the caching mode of a VxFS mount point with the -o smartiomode option. The caching mode that is set with the mount command represents the highest level of caching that can be enabled for objects on the mount point. If you specify nocache mode, the SmartIO caching is disabled for the mount point. You cannot enable SmartIO caching for any data objects in that mount point. You must remount the file system to enable caching.

Similarly, if you specify read mode during the mount, you cannot enable SmartIO writeback caching for any data objects in that mount point.

To set the caching mode of a VxFS mount point

  • To set the caching mode when you mount the VxFS file system, use the following command:
    # mount -F vxfs -o smartiomode=[mode] /dev/vx/dsk/testdg/vol1 /mnt1

    Where:

    mode is one of the following:

    • writeback

    • read

    • nocache

To change the caching mode of a VxFS mount point

  • To change the caching mode of a file or directory, use the following command. You cannot change the caching mode to a higher level of caching than the mode set on the mount_point. For example, you cannot enable read caching if you specified the mode as nocache when you mounted the file system.
    # sfcache set [-r] mode=[nocache|read|writeback] {file|dir}

    Use the -r option to make the change recursive.