Veritas InfoScale™ 7.4.2 Solutions in Cloud Environments

Public access to cluster nodes in Azure using public IP - Linux

To allow public access to a cluster node or to an application configured for HA in Azure environment, specify the IP in the PublicIP attribute for the AzureIP resource. This IP is used to map the Public IP address to a secondary private IP address. For example, if you have an application that needs to be highly available and to be accessible globally, you can use the PublicIP attribute of the AzureIP agent to ensure both.

group AzureAuthGrp (
						SystemList = { azureVM1 = 0, azureVM2 = 1 }
						Parallel = 1
						)

AzureAuth azurauth (
					SubscriptionId = 6940a326-abg6-40dd-b628-c1e9bbdf1d63
					ClientId = 8c891a8c-xyz2-473b-bigc-035bd50fb896
					SecretKey = gsiOssRooSpsPotQkmOmiQioNsjQlqHovUosQsrMt
					TenantId = 96dcasae-0448-4308-b503-6667d61dd0e3
					)
				Phantom phres (
				)

group AzurePrivateIP (
				SystemList = { azureVM1 = 0, azureVM2 = 1 }
				AutoStartList = { azureVM1, azureVM2 }
				)
				AzureIP azureipres (
				PrivateIP = "10.3.3.100"
				NICDevice = eth0
			 PublicIP = "40.71.178.90"
				AzureAuthResName = azurauth
				)
IP ipres (
			Device = eth0
			Address = "10.3.3.100"
			NetMask = "255.255.255.0"
			)
NIC nicres (
			Device = eth0
			)
			ipres requires azureipres
			ipres requires nicres