Please enter search query.
Search <book_title>...
Veritas™ Appliance iSCSI Guide
Last Published:
2019-06-24
Product(s):
Appliances (3.0)
Platform: NetBackup Appliance OS
- Overview
- Understanding the appliance configurations
- Understanding NetBackup for VMware
- Configuring iSCSI
- Configuring the appliance for iSCSI
- Setting the IQN for the initiator
- Viewing the interface properties
- Configuring the interface properties
- Removing and resetting the interface properties
- About CHAP authentication
- Discovering targets by using the portal address
- About iSNS
- Discovering targets by using iSNS
- Connecting to a target
- Disconnecting the sessions with a target
- Viewing the targets
- Troubleshooting iSCSI issues and some best practices
Configuring the appliance for iSCSI
Before configuring your appliance for iSCSI, ensure that the iSCSI targets are configured in your environment. Check the documentation provided by the target vendor for more reference.
Table: Configuring iSCSI on the appliance provides instructions to configure and set up iSCSI on the appliance.
Table: Configuring iSCSI on the appliance
Step No. | Description | Reference |
|---|---|---|
1. | Configure IQN for the initiator. This step is required. | |
2. | Configure the iSCSI interface. The IP address must be configured. You may optionally configure other interface properties like Netmask, gateway etc. | |
3. | Discover the targets by using the portal address or the iSNS server. | |
4. | Connect to the target. |