Search <book_title>...

InfoScale™ Operations Manager 9.0 Installation and Configuration Guide

Last Published: 2025-04-14

Product(s): InfoScale & Storage Foundation (9.0)

Platform: AIX,HP-UX,Linux,Solaris,VMware ESX,Windows

Configuring SNMPv3 settings

Using the Management Server console in Arctera InfoScale Operations Manager, you can configure SNMPv3 settings.

To perform this task, your user group must be assigned the Admin role on the Management Server perspective.

Prerequisites for configuring SNMPv3 settings are as follows:

To configure SNMPv3 settings for SNMP traps

In the Home page on the Management Server console, click Settings.
In the Settings tab, click Management Server.
In the Server settings tab, under SNMPv3 settings check the SNMPv3 checkbox.
Enter the User Name.
For authentication check the Authentication checkbox and do the following:
- Select the Authentication Protocol from the drop-down.
- Enter the Authentication Password.
For encryption check the Privacy Checkbox and do the following:
- Select the Privacy Protocol from the drop-down.
- Enter the Privacy Password.
Enter the path for python executable.
Click Save Settings.
To delete the settings click Delete Settings.

Table: SNMPv3 Settings

Input parameters	Security level applied		What it does
	Authentication	Encryption
User Name	User Name	No	Uses a username match for authentication.
User Name, Authentication Protocol, Authentication Password	MD5 or SHA	No	Provides authentication based on MD5 or SHA algorithms.
User Name, Authentication Protocol, Authentication Password Privacy Protocol, Privacy Password	MD5 or SHA	AES/DES 56-bit encryption	Provides authentication based on the MD5 or SHA algorithms. In addition to authentication it also provides AES/DES 56-bit encryption.