Overview 

NetBackup Appliance 5.3.0.1 Maintenance Release 3, Includes NetBackup 10.3.0.1, NetBackup Appliance 5.3, 5.3.0.1 MR1, 5.3.0.1 MR2, previously released SPs and additional important product and security fixes.

MR Download Details

Compatibility Details

Supported Upgrade Paths
 

NetBackup Appliance 5.3.0.1 MR3 supports direct upgrade from 4.1 and later versions. This includes all MRs/SPs. Pre-4.1 versions need to upgrade twice.

Although Appliance Management Server (AMS) 2.2 supports MR3, it is strongly

recommended to utilize the System Health Insights dashboard for better upgrade experience, as System Health Insights initiates, monitors, and executes with minimum user actions or external interference. For additional information, see the section Appliance Upgrade in the Veritas System Health Insights User Guide.

The following limitations are true, for HA clusters only, regarding Appliance Connectivity Toolkit (ACT), upgrade automation feature support for Security Patches (SPs):

• Upgrade from 5.3 to any 5.3 SPx is not supported.
• Upgrade from any older SPx or 5.3 SPx to 5.3.0.1 MRx is not supported.
   

Supported Appliance Models

5240, 5340, 5340HA, 5250, 5350
 

Supported NetBackup versions

• MR3 is compatible with a primary server running 10.3 or later release. 10.3 Primary server does support a media server running 5.3.0.1 MR3 or 10.3.0.1. 
• NetBackup 10.3.0.1 administrative console is required for accessing NetBackup Appliances running MR3.

Installation and Additional instructions

Appliance Upgrade Readiness Analyzer

The Appliance Upgrade Readiness Analyzer can be downloaded from here.

See here for more information about the Appliance Upgrade Readiness Analyzer.
 

Installation Time

Upgrading to 5.3.0.1 MR3 takes about two hours including rebooting.
 

Pre-Installation steps
 

• Confirm that no backup jobs are scheduled during the upgrade period.
• Deactivate all policies to ensure that no backups target the appliance you are upgrading.
• Cancel all active jobs from the NetBackup Web UI or Java Administration Console or log in to the appliance as a NetBackup CLI user and run the following command: bpdbjobs -cancel_all
• For Primary server appliances, stop data collection for Ops Center or NetBackup IT Analytics.
• For Media Server appliances, stop data collection on NetBackup IT Analytics if installed on the media server to be upgraded.
• Disable all Storage Life Cycle Policies that duplicate to/from the Media Appliances that are to be upgraded.

• The reboot that happens as part the upgrade can take a very long time if there are many LUNs. Hence, during the upgrade if the appliance can see VMWare datastores via SAN, disable the port in the SAN (on all nodes if HA appliance is involved). Once the upgrade is completed, enable the SAN port and initiate a scan of the FC.

• Veritas requires that you run the upgrade readiness analyzer on each appliance before you upgrade. Unless the Appliance is registered in NetInsights Console/System Health Insights, with Call Home enabled, and with the Health Maintenance plugin installed. 
• The Health Maintenance plugin collects upgrade readiness data and displays it in System Health Insights under the Upgrade Center tab.  Information about the Health Maintenance plugin is available here.
• For AMS, you must run the analyzer tool from the shell menu.
• For AMS, if inventory is not collected on the System Health Insights portal after an upgrade, you can collect inventory from the Clish by navigating to Support > Collect Inventory.
• Review the 5.3 Upgrade Checklist and verify all pre-upgrade steps are completed.
  Note that any references to the upgrade readiness analyzer version in the checklist are superseded by the upgrade readiness analyzer available here. 

• NetBackup Appliance 5.3.0.1 MR3 Media server is compatible with Primary servers running NetBackup Appliance versions 5.3/ 5.3.0.1 MR1/5.3.0.1 MR2/5.3.0.1 MR3 or NetBackup versions 10.3/10.3.0.1.
• After upgrades, it is important to update the firmware using the Veritas Appliance Firmware Update Tool to avoid issues caused by outdated firmware and to ensure the latest version is installed.

•  If using System Health Insights, Upgrade Center, refer to the System Health Insights Users Guide, section titled Appliance Upgrade here.

• If the MR3 installer detects the  Veritas Appliance Firmware Update Tool EEB, it uninstalls it automatically. However, all previous firmware updates remain installed.
• It is normal for the appliance to reboot automatically about midway through the MR3 installation.
• Review the available downloads from the Clish option Manage > Software > List AvailablePatch lists GA and MR patches. Before downloading one of the listed patch, verify the information regarding patch on DC and verify if you already have the patch installed on system from Clish > Manage > Software >List Version.

Additional installation instructions for NetBackup Appliance 5340 High Availability (HA) setup

• Before installing MR3 on both nodes, ensure that the two-node HA setup is fully configured.
• Start the upgrade process on the node where the MSDP service and the virtual IP service are offline, typically, the partner node.
• After the partner node has been upgraded, run the Manage > High Availability > Switchover command to bring the Virtual IP online on the node installed with MR3.
• The HA status can be checked by using the following command: Manage > HighAvailability > Status 

If the HA services status is not as described in the following table, contact Veritas Support for assistance.

• For information on configuring a two-node HA setup, see the Veritas NetBackup Appliance High Availability Reference Guide.
• Switchover to the original node to ensure correct functionality.
   

Post-Installation Instructions

• The newly installed version can be checked using either of the following commands. The expected output of each command is also included.

           Manage > Software > UpgradeStatus 

                  The appliance version is 5.3.0.1 Maintenance Release 3 and not in upgrade state.

           Manage > Software > List Version 

                   Appliance Version: 5.3.0.1

                  NetBackup Version: 10.3.0.1

                 Build Date: 5.3.0.1-20241010101418

                 Maintenance Release Version: 3

          Appliance > Status

               Appliance Model is NetBackup Appliance 5xxx.

              Appliance Version is 5.3.0.1 Maintenance Release 3.