Veritas™ 5360 Appliance Product Description Guide

Last Published:
Product(s): Appliances (Version Not Specified)
Platform: Veritas 5360
  1. About the Veritas 5360 Appliance
    1.  
      Veritas 5360 Appliance overview
    2.  
      Features and components of the appliance
    3.  
      Locating the appliance serial number
    4. Compute node drive configurations
      1.  
        About the drive LEDs
    5.  
      About the Veritas 5360 Appliance front panel USB port
    6. About the 5360 Appliance control panel
      1.  
        About the System Status LED states
      2.  
        About the Power button LED states
    7.  
      About the compute node rear panel
    8. Veritas 5360 Appliance I/O configuration options
      1.  
        Total I/O on-board and PCIe ports
      2.  
        Available I/O configurations by slot for Veritas 5360 Appliance
      3.  
        Broadcom P225p 10/25Gb PCIe Ethernet card
      4.  
        QLE2772 dual-port 32 Gb Fibre Channel host bus adapter
      5.  
        Intel Storage Adapter RS3P4GF016J
  2. About the Veritas 5U84 Storage Shelves
    1. About Veritas 5360 Appliance storage shelves
      1.  
        Available appliance storage options
      2. About the Veritas 5U84 Storage Shelf disk drive drawers
        1.  
          Disk drive slot numbering
        2.  
          Disk Drive In Carrier (DDIC) modules
        3.  
          Disk Drive Drawer printed circuit board (PCB) assemblies
        4.  
          Drawer Sideplane Status panels
        5.  
          Drawer Sideplane hot swap LED indicators
      3.  
        5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf control panel
    2. About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
      1.  
        Veritas 5U84 Primary Storage Shelf RAID controllers
      2. Veritas 5U84 Expansion Storage Shelf Expansion I/O modules
        1.  
          Expansion I/O module Status LED location and conditions
        2.  
          Expansion I/O module SAS Activity LED location and conditions
      3.  
        Veritas 5U84 Storage Shelf cooling modules
      4.  
        5U84 Storage Shelf Power Supply Units
  3. Veritas 5360 Appliance and 5U84 Storage Shelf cables
    1.  
      Power cables
    2.  
      Network cable
    3.  
      SAS-3 cable
    4.  
      Twinaxial copper cables
  4. Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
    1.  
      Veritas 5360 compute node technical specifications
    2.  
      Veritas 5U84 Storage Shelf technical specifications
    3.  
      Environmental specifications
    4.  
      Protocol standards
    5.  
      Regulatory, compliance, and certification information
    6.  
      Product regulatory compliance
    7.  
      Country approvals
    8.  
      Product safety compliance
    9.  
      Product EMC Compliance - Class A Compliance
    10.  
      Product environmental compliance

5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf control panel

The control panel is installed on the left side of both the 5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf. It is functionally the same for both systems.

Figure: Control panel location

Control panel location

Figure: Control panel

Control panel

The following table describes the control panel functions.

Table: Control panel functions and descriptions

Number

Function

Description

1

Unit Identification Display

The Unit Identification Display is a dual digit display that provides information about the storage shelf. Its primary function is to assist in the configuration of multiple storage shelves that are connected to the appliance.

2

Input button

The Input button enables you to set the Unit Identification display number.

3

Power On / Standby LED (Green or Amber)

The Power On/Standby LED shows Amber when only standby power is available. Otherwise, the LED shows Green when system power is available.

4

Module Fault LED (Power Cooling Module, I/O module status) (Amber)

The Module Fault LED illuminates when there is a system hardware fault. The system hardware fault may be associated with a fault LED on a Power Cooling Module (PCM) or on an I/O module.

5

Logical Fault LED (Amber)

The Logical Status LED shows a change of status or a fault. Typically these changes of status or faults are associated with the shelf's disk drives. However, the Logical Status LED can also indicate an issue with an internal RAID controller or external RAID controller, or with a host bus adapter.

6

Top Drawer Fault (Amber)

The Top Drawer Fault LED (drawer 1) shows a change of status or a fault with the top disk drive drawer in the storage shelf.

7

Bottom Drawer Fault (Amber)

The Bottom Drawer Fault LED (drawer 2) shows a change of status or a fault with the bottom disk drive drawer in the storage shelf.