NetBackup IT Analytics Data Collector Installation Guide for Fabric Manager

Last Published:
Product(s): NetBackup IT Analytics (11.1)
  1. Fabric Manager Data Collection overview
    1.  
      Introduction
    2.  
      Fabric Manager: Collection of SAN switch data
    3.  
      Switch zone alias collection
  2. Pre-Installation setup for Brocade switch
    1.  
      Pre-Installation setup for Brocade switch
    2.  
      Prerequisites for adding Data Collectors (Brocade switch)
    3.  
      Upgrade troubleshooting: Brocade BNA SMI-S (CIM) server and Java 11
    4.  
      Supported switches
    5.  
      Brocade switches: Default ports and firewall considerations
    6.  
      Installation overview (Brocade switch)
    7.  
      Brocade switch Data Collector policy
  3. Pre-Installation setup for Cisco switch
    1.  
      Pre-Installation setup for Cisco switch
    2.  
      Prerequisites for adding Data Collectors (Cisco switch)
    3.  
      Upgrade troubleshooting: Cisco DCNM SMI-S (CIM) server and Java 11
    4.  
      Cisco switches: Default ports and firewall considerations
    5.  
      Installation overview (Cisco switch)
    6.  
      Cisco switch Data Collection policy
    7.  
      Before you start Cisco switch Data Collection
  4. Pre-Installation setup for Brocade Zone alias
    1.  
      Pre-Installation setup for Brocade zone alias
    2.  
      Prerequisites for adding Data Collectors (Brocade zone alias)
    3.  
      Brocade switches: Default ports and firewall considerations
    4.  
      Installation overview (Brocade zone alias)
    5.  
      Brocade zone alias Data Collector policy
  5. Pre-Installation setup Cisco Zone alias
    1.  
      Pre-Installation setup Cisco zone alias
    2.  
      Prerequisites for adding Data Collectors (Cisco zone alias)
    3.  
      Cisco switches: Default ports and firewall considerations
    4.  
      Installation overview (Cisco Zone Alias)
    5.  
      Cisco zone alias Data Collector policy
  6. Installing the Data Collector software
    1.  
      Introduction
    2.  
      Installing the WMI Proxy service (Windows host resources only)
    3.  
      Testing WMI connectivity
    4.  
      Considerations to install Data Collector on non-English systems
    5.  
      Install Data Collector Software on Windows
    6.  
      Install Data Collector software on Linux
    7.  
      Deploy Data Collector in native Kubernetes environment
    8.  
      Configure Data Collector manually for Veritas NetBackup
  7. Validating Data Collection
    1.  
      Validation methods
    2.  
      Data Collectors: Vendor-Specific validation methods
    3. Working with on-demand Data Collection
      1.  
        View real-time logging during an on-demand collection
    4.  
      Using the CLI check install utility
    5.  
      List Data Collector configurations
  8. Uninstalling the Data Collector
    1.  
      Uninstall the Data Collector on Linux
    2.  
      Uninstall the Data Collector on Windows
  9. Manually starting the Data Collector
    1.  
      Introduction
  10. Appendix A. Firewall configuration: Default ports
    1.  
      Firewall configuration: Default ports

Deploy Data Collector in native Kubernetes environment

This procedure provides the steps to deploy Data Collector Docker image on a Kubernetes cluster through an operator with the required configuration on Linux hosts. This method enables efficient Data Collector installation and reduces the human errors caused during manual or ISO-based installations.

Prerequisites and dependencies

System requirements and installation dependencies for the system on which Data Collector will be installed are listed below:

  • Obtain the Docker image generated from the CI/CD build.

  • Kubernetes must be pre-installed on the system.

  • Assume root role on the host system.

  • Kubernetes cluster must be accessible on the system.

  • Ensure that the file system supporting the /data directory has enough free space as recommended in the NetBackup IT Analytics Certified Configurations Guide for Data Collector.

    The /data directory in the host system will be mounted inside the container as /opt/aptare.

  • Obtain the following Data Collector details. You are required to supply these details to the installer during the installation process.

    • Registry: The name of the registry to which you want to push the installer images.

    • Data Collector Name: Name of the Data Collector as defined in the portal.

    • Data Collector Passcode: The passcode assigned to the Data Collector during its creation.

    • Data Receiver URL: Either http:// or https:// URL of the data receiver.

    • Absolute path of Data Receiver Certificate file: Absolute path of the data receiver certificate file downloaded from NetBackup IT Analytics Portal.

    • Absolute path of the Data Collector key file: Absolute path of the data collector key file downloaded from NetBackup IT Analytics Portal.

    • Proxy settings:

    • Portal IP address: IP address of the system hosting the NetBackup IT Analytics Portal.

    • Portal HostName: aptareportal.<DOMAIN> or itanalyticsportal.<DOMAIN>

    • Agent HostName: aptareagent.<DOMAIN> or  itanalyticsagent.<DOMAIN>

    • StorageClass Name: Name of the Kubernetes storage class to be used.

  • Obtain the itanalytics_k8s_artificats.tar from the Veritas Download Center. The tarball has the container image, operater image, set of .yaml files, and the scripts.

Deploy the Data Collector in Kubernetes environment

To deploy the Data Collector in Kubernetes environment:

  1. Login to the Kubernetes cluster.
  2. Run this command on the primary node and label the node on which you want to deploy the Data Collector.
    kubectl label node <worker_node_name> itaDcNodeKey=itaDcDeploymentNode
  3. From the itanalytics_k8s_artifacts.tar location, run this command to initiate the Data Collector installation.
    tar -xvf itanalytics_k8s_artifacts.tar scripts

    This saves a scripts folder at the itanalytics_k8s_artifacts.tar file location,.

  4. From the scripts folder, run this script.
    cd scripts/
sh itanalytics_dc_installer.sh

    Note:

    The installation logs are saved to itanalytics_dc_installer_<time_stamp>.log.

  5. Provide the Data Collector configuration details when asked by the installer in the following order.

    • Registry

      The installer asks for a confirmation after providing the registry name to proceed with pushing the images. You need to enter y for a fresh installation. If for any reason, you are required to re-run the installation and this step was successfully completed anytime before for the same cluster node, you can enter n to avoid a rewrite and bypass this step.

    • Data Collector Name

    • Data Collector Passcode

    • Data Receiver URL

    • Absolute path of Data Receiver Certificate file (if you have set an https:// URL for the data receiver)

    • Absolute path of the Data Collector key file

    • Proxy settings

    • Portal IP address

    • Portal HostName

    • Agent HostName

    • StorageClass Name

  6. The installer asks to confirm the configuration details before proceeding with the installation. Enter y to proceed with the data collector installation

After a successful installation, verify whether the Data Collector status appears Online on the NetBackup IT Analytics Portal.

Connect to the pod instance

Run this command to connect to the pod instance and also to facilitate debugging when required.

# kubectl exec -it<pod ID> -- bash