NetBackup IT Analytics Data Collector Installation Guide for Capacity Manager

To add the policy

1. Select Admin > Data Collection > Collector Administration. Currently configured Portal Data Collectors are displayed.
2. Search for a Collector if required.
3. Select a Data Collector from the list.
4. Click Add Policy, and then select the vendor-specific entry in the menu.

   For HP Command View Advanced Edition, HP XP arrays are treated as Hitachi Block Storage. To add a policy to collect from HP StorageWorks XP arrays (HP Command View Advanced Edition), use this Hitachi Block Storage Data Collector Policy.

5. Specify Data Collector Properties.
   
6. Add or select the parameters. Mandatory parameters are denoted by an asterisk (*):

   Field	Description
   Collector Domain	The domain of the collector to which the collector backup policy is being added. This is a read-only field. By default, the domain for a new policy will be the same as the domain for the collector. This field is set when you add a collector.
   Policy Domain	The Collector Domain is the domain that was supplied during the Data Collector installation process. The Policy Domain is the domain of the policy that is being configured for the Data Collector. The Policy Domain must be set to the same value as the Collector Domain. The domain identifies the top level of your host group hierarchy. All newly discovered hosts are added to the root host group associated with the Policy Domain. Typically, only one Policy Domain will be available in the drop-down list. If you are a Managed Services Provider, each of your customers will have a unique domain with its own host group hierarchy. To find your Domain name, click your login name and select My Profile from the menu. Your Domain name is displayed in your profile settings.
   Hitachi Device Manager Server*	The address of the Hitachi Device Manager Server--either the IP address or server name. For HP Command View Advanced Edition, use the IP address or server name of the Command View Server. If this policy is being created to collect block storage shared with Hitachi NAS (HNAS), you must specify the IP address of the Hitachi Device Manager that manages the array that shares capacity with HNAS. See Configuring a Collector for Hitachi NAS block storage.
   User ID*	Use the User ID and passcode as defined in Hitachi Device Manager (HDvM). This typically would be an administrator privilege, but must be a minimum privilege of a view-only user. Create a new user with view-only privileges and add the user to ViewGroup, a built-in HDvM group. See Configuring a Hitachi Device manager user. For Hitachi Device Manager 7.1.1 and 7.2, the user ID configured to access HDvM must have view permissions to HRpM and HTSM.
   Password*	Note: The password is encrypted prior to saving in the database and is never visible in any part of the application.
   Exclude Arrays	Enter one or more array names to be excluded. Comma-separated names are supported. Example: USPV1_172.16.1.13, USPV1_172.16.1.14, AMS - Corporate(5100)@172.16.1.43
   Array Details	Click the check box to activate array details collection. Click the clock icon to set the schedule. For example: */30 * * * * means every 30 minutes */20 9-18 * * * means every 20 minutes between the hours of 9am and 6pm */10 * * * 1-5 means every 10 minutes Mon - Fri.
   Array Performance	Click the check box to activate performance collection and enable entries and selections for the HTnM Install Location and the Performance Schedule. Note that at least one collection from this array must be performed BEFORE array performance data can be collected. Requirement: To collect performance data from Hitachi Tuning Manager, the Data Collector must be installed on the same server as Tuning Manager. And, a single Data Collector policy must be used to collect both the capacity data from the Device Manager server and the performance data from the Tuning Manager server.
   HTnM Install Location	Specify the Tuning Manager server installation directory. By default, the Tuning Manager server will be installed in the following locations: Windows Server 2003 (x86) and Windows Server 2008 (x86): %SystemDrive%\Program Files\HiCommand\TuningManager Windows Server 2003 (x64) and Windows Server 2008 (x64): %SystemDrive%\Program Files (x86)\HiCommand\TuningManager Solaris: /opt/HiCommand/TuningManager
   HIAA Array Performance	Click the check box to activate performance collection using Hitachi Infrastructure Analytics Advisor (HIAA) . Note that at least one collection from this array must be performed BEFORE array performance data can be collected. This probe collects LUN and Port performance information.
   HIAA Server	The IP address of the Infrastructure Analytics Advisor management server. Typically, only the IP address/Host name is required, with port 22015 for HTTP, and 22016 for HTTPS used as the default. To change the port that the Data Collector uses to communicate with the array, use the format: <ipaddress>:<port number>. For example: 172.16.1.1:443.
   HIAA User ID	Admin username for accessing the Hitachi Infrastructure Analytics Advisor.
   HIAA Password	Password for the Admin username (User ID) for accessing the Hitachi Infrastructure Analytics Advisor.
   HDT Collection	Activate HDT Collection. An HDT Schedule is not required if your HDvM is not managing VSP arrays running HDT. Click the clock icon to create a schedule frequency. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available. Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
   Notes	Enter or edit notes for your data collector policy. The maximum number of characters is 1024. Policy notes are retained along with the policy information for the specific vendor and displayed on the Collector Administration page as a column making them searchable as well.

7. Click OK to save the Policy and return to the Collection Administration window where the Policy will be listed under the Data Collector.
8. On the Data Collector server, install/update the Data Collector software.