Search <book_title>...

NetBackup IT Analytics Certified Configuration Guide

Last Published: 2024-02-22

Product(s): NetBackup IT Analytics (11.2)

Supported systems and access requirements

Capacity Manager currently supports the storage management products and storage arrays listed below. In general, any storage array that the device manager or command-line interface supports should work with Capacity Manager. For specific prerequisites and configuration requirements, see the specific Data Collector information.

Capacity Chargebacks can be configured for block storage only; file-based storage is not supported for Array Capacity Chargeback.

Data Collectors require the following privileges to access APIs and underlying details:

On Linux, root privileges for SSH
On Windows, administrator privileges for WMI.

Table: Data Collection Prerequisites

Vendor	Subsystems	Dev Mgr/API/CLI	Access Requirements	Ports	Notes
Dell	Compellent	v6.4, 6.5, 6.5.1 Enterprise Manager,v6.2.2.8 and v14.2.2.6 for SMI-S provider and DB	SMI-S Provider User ID. Enterprise Manager IP address. Enterprise Manager DB IP address.	5988 SMI-S over http 5989 SMI-S over https 1433 DB	No installations required on the Data Collector server.
Dell EMC	Unity	330/300F, 400/400F, 500/500F, 600/600F, 350F, 450F, 550F and 650F	User credentials with "security administrator" role is required to connect to Dell EMC Unity storage array using REST API.	REST API version 4.3.0 on Port 443 or 8443
EMC	Elastic Cloud Storage (ECS)	3.x	User must belong to Management Users with System Monitor privilege	REST API on Port 80 or 4443
EMC	VNX (Block)	Naviseccli, Navicli, v7.30, 7.31, 7.32	IP address/hostname Customize: <ip address>:<port>	Defaults:443, 2163, 6389, 6390, 6391, 6392	NaviSecCLI must be installed on the Data Collector server. Enable statistics logging on the VNX system to collect LUN performance data. A low security level for certificates is required. Ensure this setting by using the following command: naviseccli security -certificate -setLevel low
EMC	VNX (File), Celerra	v7.0.40.1, 7.0.50.2, 7.0.52, 7.1.56	XML API v2 access allowed must be enabled for Client Access. XML API server must be running. Read-only user (Operator role).	Defaults:443, 2163, 6389,6390, 6391,6392	No installations required on the Data Collector server.
EMC	Data Domain	5.0, 5.1, 5.2, 5.4, 5.5, 5.6, 5.7, 6.0, 6.1, 6.2, 7.1, 7.2, 7.6, 7.7		Port 22 (SSH)
EMC	Isilon	Isilon OneFS 6.5, 7.0, 7.1, 7.1.1, 7.2, 8.0, 9.1.0.4	Access to a single, externally addressable node in the cluster via SSH. Root access required (for certain isi commands).	22	A sudo user, specific to this data collection, can be used for root-level access.
EMC	Symmetrix	Solutions Enabler (Symcli), v7.1.3, 7.2, 7.3, 7.4, 7.5, 7.6.1, 7.6.2, 8.0, 8.1 Unisphere 8.3 PowerMax 2000	No User ID & pwd required.	2707 5480	Data Collector must be installed on the server that manages the Symmetrix arrays. Symcli uses Fibre Channel (FC) to communicate; Data Collector must be installed on a server connected via FC to the Symmetrix array, by a switch, if necessary. Sample command: symcfg list -v Unisphere 8.3 is used for Performance collection.
EMC	VPLEX	5.3, 5.4	User ID & pwd for the VPLEX storage system.	https TCP 443	The VPLEX storage system should be reachable by the Data Collector server.
EMC	XtremIO	Management Server 3.0.x, 4.0.x X2 (V6.0.x)	Read-only user ID & pwd	80	REST API
Hitachi	Hitachi Content Platform (HCP)	version 7.2.x.x, Mib version 7.2 version 9.3	Read-only user ID & pwd (Local User/AD User). Refer to the HCP-specific data collector information for all permissions.	SNMP:161 REST API: https 9090	SNMP v2/3 REST API
Hitachi	Virtual Storage Platform (VSP) Hitachi Universal Storage Platform V Hitachi Unified Storage (HUS) Model 100 Series (DF850) TagmaStore AMS, USP, WMS, Network Storage Controller Lightning 9900 V Series Thunder 9500 V Series HP Command View Advanced Edition	Hitachi Device Manager (HDvM), 5.5, 6.0, 6.1, 6.2, 6.3. 6.4, 7.0, 7.1.1, 7.2, 7.3, 7.4, 7.6, 8.0, 8.4, 8.5 Hitachi Dynamic Tiering (HDT) starting with HDvM v7.1; Valid only if your HDvM is managing VSP arrays running HDT.	Name of Device Manager server. Admin User ID & pwd of Device Manager. For 7.1.1 thru 7.4, the User ID configured to access HDvM must have view permissions to HRpM and HTSM. Use the Admin username for accessing the Hitachi Infrastructure Analytics Advisor	TCP 2001. For the HIAA probe: 22015 is used for HTTP and 22016 is used for HTTPS.	XML API calls over HTTP HP XP arrays are treated as Hitachi Block Storage
Hitachi	Hitachi Tuning Manager (for performance data collection)	Hitachi Tuning Manager (HTnM) versions 7.2, 7.3, 7.4, 8.1	Supported on Windows only.	N/A	Data Collector must be installed on the host where Tuning Manager is installed. Single Data Collector policy must be used to collect both capacity data from the Device Manager server and performance data from the Tuning Manager server.
Hitachi (HNAS)	BlueArc	Hitachi NAS CLI Supported versions 10.x and 11.x 14.2.xx	Hitachi NAS Admin EVS addresses separated by commas. The location of the SiliconServer Control (SSC) CLI. For example: Linux: /usr/bin/ssc Windows: c:\program files\ssc Create a user with supervisor privileges for accessing the Hitachi NAS.	N/A	To collect block storage that is shared with HNAS, create a separate data collector policy for the relevant supported vendor storage; for example, Hitachi Storage.
	NAS
	HUS (File Module)
Hitachi Vantara	All-Flash and Hybrid Flash Storage Note: VSP (R700), USP_V(R600), VSP E790 or older models before USP_V are NOT supported.	CM-REST 10.5.1 (REST API Version 1.23.0) CCI version : 01-53-03/XX or later.	For Array Details and HDT Probe : User with Storage Administrator (View Only) permissions is required to access Hitachi Ops Center Configuration Manager REST API Server. For HIAA Array Performance probe : Use the Admin username for accessing the Hitachi Infrastructure Analytics Advisor. CCI version : 01-53-03/XX or later.	For the Array Details probe: 23450 is used for HTTP and 23451 is used for HTTPS. For the HIAA Array Performance probe: 22015 is used for HTTP and 22016 is used for HTTPS.	REST API
HPE	3PAR	InForm 2.3.1, 3.1.1, 3.1.2, 3.2.2, and 3.3.1	Comma-separated list of IP addresses or host names of the HP 3PAR servers from which to collect data. User ID & Password must be the same for all servers listed in the Server Address field.	ssh: 22 for CLI	Uses CLI collection via ssh
	Primera	4.1 and 4.2		ssh: 22 for CLI	Uses CLI collection via ssh
	HP	EVA	v8400, 6400, 6100, 4400	Server name or IP address of the HP EVA management server. SSSU user name & password.	2372	HP Storage System Scripting Utility (SSSU) must be installed on the Data Collector server.
HP	StorageWorks XP	Hitachi Device Manager (HDvM), 5.5, 6.0, 6.1, 6.2, 6.3. 6.4, 7.0, 7.1.1, 7.2, 7.3, 7.4, 7.6, 8.0 HP Command View Advanced Edition (CLI/SMI-S enabled) Hitachi Dynamic Tiering (HDT) starting with HDvM v7.1; Valid only if HDvM is managing VSP arrays running HDT.	Name of Device Manager server Admin user ID & password of Device Manager. For 7.1.1 & 7.2, user ID configured to access HDvM must have view permissions to HRpM & HTSM.	Ensure port 2001 is open	XML API calls over HTTP. For HP Command View Advanced Edition, HP XP arrays are treated as Hitachi Block Storage.
HPE	Nimble Storage	5.0.7.100-607338-opt REST API Reference Version 5.0.1.0	Storage System Addresses	5392
IBM	6000 & 8000 (Enterprise arrays)	DSCLI 5.2.2.272	User account on the array with monitor group privileges See IBM Arrays: Modify profile.	1751 1750 1718	DSCLI must be installed on the Data Collector server. Location: Linux: `/opt/ibm/dscli` Windows: `C:\Program Files\IBM\dscli`
IBM	N Series	Data ONTAP, versions 7.2, 7.3, 8, 8.1 7-Mode and Cluster-Mode, 8.3P1 Cluster-Mode, 9	Use an existing NetApp user or create one with the necessary privileges to access the API: `login-http-admin` *`api-`** See Creating a NetApp user with API privileges.	443	Typically, the root, admin user has all the capabilities, but it is not advisable to use root or admin passwords. If api-* does not meet your security requirements, contact Support for a list of exact required api privileges.
IBM	SVC v4.3.x, v5.1, v6.1 - 6.4, v7.4 Storwize V7000 FlashSystem V9000, FlashSystem 840/900, FlashSystem 7200	Performance data is collected only for SVC 6.x and 7.4, with an SMI-S version of 1.4 or above.	Namespace: /root/ibm IP address or hostname of SVC primary console (from which data will be collected). Super User ID & pwd for CIMOM. Super User ID refers to the user ID of the SVC primary console server. The same user is used to execute CLI commands via ssh. Enable statistics collection via the SVC UI: Manage Clusters > Start Statistics Collection.	5988 5989 ssh: 22	SSPC (System Storage Productivity Center) with CIMOM agent is required OR embedded CIMOM for v5.1, v6.1 & v6.3. Known issue: v5.1.08 does not provide vdisk data. The data collector can run on any server that can access the SSPC server with CIMOM.
IBM	VIO	v1.5, v2.1, Hardware Management Console (HMC) Version 7	IP Address/Hostname of LPAR Management Server of either HMC (Hardware Management Console) or IVM (Integrated Virtualization Manager). User name & password for LPAR Management Server. For HMC, user name should have at least HMCViewer permissions.	ssh: 22
IBM	XIV, Model 2810/2812-A14 (Gen 2), Model 2810/2812-114 (Gen 3)	XIV Storage Manager, v10.1.x, v10.2.x	XCLI must be installed on the Data Collector server. Read-only user credentials are sufficient for executing XCLI commands for data collection.	TCP 7778
IBM	Cloud Object Storage	v3.14.9.47, REST API	User credential with "Super User" role for IBM Cloud Object Storage.	443
LSI	LSI 1532, 1932, 3992, 3994, 6994, 6998, 7900	IBM Storage Manager CLI: 3K series: 02.70.G5.15 & above 4K/5K series: 10.10.G5.05 & above 6K/8K series: DSCLI 5.2.2.272 & above	See the corresponding IBM Array requirements.	N/A
NetApp	FAS6000 Series, FAS3100 Series, FAS3000 Series, FAS2000 Series, V-Series	Data ONTAP, versions 7.2, 7.3, 8, 8.1, 8.2, 7-Mode and Cluster-Mode, 8.3P1 Cluster-Mode, 9	Use an existing NetApp user or create one with the necessary privileges to access the API: `login-http-admin` *`api-`** Typically, the root, admin user has all the capabilities, but it is not advisable to use root or admin passwords. See Creating a NetApp user with API privileges.	TCP 80/443	Array performance data also can be collected via the ONTAP API. If api-* does not meet your security requirements, contact Support for a detailed list of exact api privileges that are required.
NetApp	E-Series: E2600, E2700, E5400, E5500, EF560, E2800	SANtricity SMcli: 10.86, 11.30		TCP 2436	SMCLI must be installed on the Data Collector server. Location: Linux: `/opt/SM8/client/` Windows: `C:\Program Files\SM8\client` This also applies to the IBM DS Series arrays.
NetApp	StorageGRID	Rest API	IP address / hostname Grid Account credentials Tenant Account credentials	Default: 443	Rest API calls over HTTPS
OpenStack	OpenStack Swift (Juno10, TBC), SwiftStack v2.2		Keystone v2 Proxy path for Swift configuration files must be specified. Controller credentials that have access to tenants/projects. Swift proxy server credentials with super-user privileges.	35357 for Keystone Admin 5000 for Keystone Public 22 for SSH	If multiple proxies exist, NetBackup IT Analytics uses only one. Capacity reports will reflect only one proxy. Configure the policy to use the address of the actual proxy server, not the server responsible for load balancing. Capacity data is collected from devices mapped to OpenStack nodes.
OpenStack	OpenStack Ceilometer	REST API		8777
Pure Storage	FlashArray	REST API	View-only User ID for the Pure Storage FlashArray storage system.	443	API calls for HTTPS
Sun	StorEdge 9900	Hitachi Device Manager (HDvM), 5.5, 6.0, 6.1, 6.2, 6.3. 6.4, 7.0, 7.1.1, 7.2, 7.3, 7.4, 7.6, 8.0	Device Manager server name. Admin user ID & password of Device Manager.	2001	XML API calls over HTTP
Veritas	NetBackup 5xxx Appliances.	NetBackup Appliance 3.1.2, 3.2, 3.2.1		1556
Veritas	Veritas Flex Appliance models: 5150 5250 5340 5350	Veritas Flex Appliance versions 2.0, 2.1, and 3.0.	FQDN of the Flex appliance Administrator user credentials	443	The data collection supported for each Veritas Flex Appliance version is as indicated below. Appliance Details probe: 2.0, 2.1, 3.0 Performance Statistics probe: 2.0, 2.1, 3.0 Storage Statistics probe: 2.0.1, 2.1, 3.0
Fujitsu	Eternus CS8000 The following models of Eternus DX/AF are supported: Dx600 S4, AF50 S3, AF250 S1, Dx100 S4 DX8700 S3	Fujitsu Eternus CLI	IP address/host name of the Fujitsu Eternus System. User ID and password for the Fujitsu Eternus System Model of the Eternus System.	ssh: 22
NEC	HYDRAstor [support model] Japan iStorage HS3-50, HS3-50S iStorage HS6-50A, HS6-50AS iStorage HS8-50, HS8-50S iStorage HS Lite Except for Japan NEC Storage HS6-50A, HS6-50AS NEC Storage HS8-50, HS8-50S NEC Storage HS Virtual Appliance(HSVA)	Rest API execution for supported version - V5.7.0 + P5.7.0-N002 and V5.7.1	NEC Storage HS (HYDRAstor) Floating IP addresses or host names. User ID and password for the HYDRAstor System Administrator credentials	Default port: 5080	The user must be with the administrative role. In Array Performance probe, File-System capacity detail will be collected once a day.