Veritas NetBackup™ Appliance iSCSI Guide
- Overview
- Understanding the appliance configurations
- Understanding NetBackup for VMware
- Configuring iSCSI
- Configuring the appliance for iSCSI
- Setting the IQN for the initiator
- Viewing the interface properties
- Configuring the interface properties
- Removing and resetting the interface properties
- About CHAP authentication
- Discovering targets by using the portal address
- About iSNS
- Discovering targets by using iSNS
- Connecting to a target
- Disconnecting the sessions with a target
- Viewing the targets
- Troubleshooting iSCSI issues and some best practices
QLE8442 dual-port 10Gb Ethernet/iSCSI capable card with SFP+ modules
The QLE8442 is a dual-port 10GbE network interface card. It supports simultaneous LAN (TCP/IP) and SAN (Fibre Channel over Ethernet [FCoE] and iSCSI) traffic at 10Gbps Ethernet (GbE) line rate speeds. The QLE8442 also provides very low host CPU usage by enabling full hardware offloads.
Table: QLE8442 dual-port 10Gb Ethernet card specifications
Item | Specification |
|---|---|
Bracket height | Full height |
Power consumption | 9.65 watts (nominal) |
System interface type | PCIe v3.0 |
Speed and slot width | 8.0 GT/s, 8-lane |
Storage over Ethernet | iSCSI |
LED indicators | LINK/ACTIVITY Off = No link (cable disconnected) Continuously illuminated = Line on Blinking = Network activity |
Certifications | FCC A, ICES A, UL, CE, VCCI, CISPR, KCC |
Operating temperature | 0 to 55 C (32 TO 131 f) |
Storage temperature | -40 to 65 C (-40 to 149 F) |
Operational humidity | 7% to 93% @ 55 C |
Storage humidity | 93% maximum at 65 C |
Air flow | 100 LFM @ 55 C |
To purchase a QLE8442 dual-port 10Gb Ethernet card with SFP+ modules for your appliance, contact your Veritas sales representative, or your Veritas Partner representative.
QLE8442 dual-port 10Gb Ethernet card with SFP+ modules | |
SKU Number | Description |
18293 | NETBACKUP APPLIANCE XX40 QLOGIC QLE8442 10GBPS DUAL PORT ETHERNET/ISCSI CRU with SFP modules included |