Veritas NetBackup™ 5240 Appliance Product Description
- About the NetBackup 5240 Appliance
- NetBackup 5240 Appliance overview
- Features and components of the NetBackup 5240 Appliance
- NetBackup 5240 Appliance front panel disk drive configurations
- NetBackup 5240 Appliance front panel USB port
- NetBackup 5240 Appliance control panel
- NetBackup 5240 Appliance rear panel
- NetBackup 5240 Appliance I/O configuration options
- NetBackup 5240 Appliance total I/O on-board and PCIe ports
- Customizable I/O configurations by slot for existing NetBackup 5240 Appliance installations
- QLE2692 dual-port 16Gb Fibre Channel host bus adapter
- Intel X710-DA2 dual-port 10Gb Ethernet card
- Dual-port 10 Gb Ethernet card with SFP+ transceiver ports
- QLE8442 dual-port 10Gb Ethernet/iSCSI capable card with SFP+ modules
- QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules
- Quad-port 1Gb Ethernet card with RJ45 connectors
- SAS tape-out adapter
- NetBackup 5240 Appliance Network Interface Port locations and speeds
- NetBackup 5240 Appliance I/O configuration options
- About the Veritas 2U12 49TB Storage Shelf
- NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf cables
- Appendix A. Technical specifications and compliance standards
- NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf technical specifications
- Environmental specifications
- Protocol standards
- Regulatory, compliance, and certification information
QLE2692 dual-port 16Gb Fibre Channel host bus adapter
The QLE2692 dual-port 16Gb Fibre Channel (FC) host bus adapter is used as an initiator for tape-out purposes.
The QLE2692 dual-port 16Gb Fibre Channel (FC) host bus adapter connects the appliance compute node to the 5U84 Primary Storage Shelf.
Table: QLE2692 dual-port 16Gb Fibre Channel host bus adapter specifications
Item | Description | ||||
|---|---|---|---|---|---|
Bracket height | Full Height | ||||
Form factor | Low-profile PCIe card (6.6 inches × 2.731 inches) | ||||
Power consumption (watts) | 9.3 W | ||||
Operating temperature | 0°C to 55°C (32°F to 131°F) | ||||
Storage temperature | - 20°C to 70°C ( - 4°F to 158°F) | ||||
Operating humidity | 10% to 90% | ||||
Storage humidity | 5% to 95% | ||||
System interface type | PCIe v3.0 | ||||
Certifications | UL, CSA, TUV, CB, FCC, VCCI | ||||
Maximum cable distances | Rate | Cable and Distance (m) (multimode optic cable) | |||
OM1 | OM2 | OM3 | OM4 | ||
4Gbps | 70 | 150 | 380 | 400 | |
8Gbps | 21 | 50 | 150 | 190 | |
16Gbps | * | 35 | 100 | 125 | |
* Not supported | |||||
The following table describes the Fibre Channel host bus adapter LED indicator status activity.
Table: QLE2692 dual-port 16Gb Fibre Channel host bus adapter LED indicator status activity
Yellow LED | Green LED | Amber LED | Activity |
|---|---|---|---|
Off | Off | Off | Power off |
On | On | On | Power on (pre-firmware initialization) |
Blink | Blink | Blink | Power on (post-firmware initialization ) |
Blink alternately | Blink alternately | Blink alternately | Firmware error |
Off | Off | On/Blink | 4Gbps link / input-output (I/O) activity |
Off | On/Blink | Off | 8Gbps link / input-output (I/O) activity |
On/Blink | Off | Off | 16Gbps link / input-output (I/O) activity |
To purchase a QLE2692 dual-port 16Gb Fibre Channel host bus adapter for your appliance, contact your Veritas sales representative, or your Veritas Partner representative.
QLE2692 dual-port 16Gb Fibre Channel host bus adapter | |
SKU Number | Description |
19441 | QLOGIC 16Gb Fibre Channel host bus adapter |