NetBackup nbhba command does not recognize ports on some newer QLogic QLE-2562 cards as being on the same card.
Problem
NetBackup nbhba command does not recognize ports on some newer QLogic QLE-2562 cards as being on the same card.
Solution
When nbhba fails to recognize the ports are on the same card, each port must be individually modified as if there ports were on single port cards. This can be done by naming the World Wide Name (WWN) of each port when setting the mode to target. For example:
/usr/openv/netbackup/bin/admincmd/nbhba -modify -wwn <wwn string> -wwn <wwn string> -wwn <wwn string> -mode target
Where "wwn string" is the World Wide Name of the port.
This configuration option may be needed on QLA/QLE-2462, QLE-2562 (dual port) and QLE-2564 (quad port) cards.
Was this content helpful?
Translated Content
Please note that this document is a translation from English, and may have been machine-translated. It is possible that updates have been made to the original version after this document was translated and published. Veritas does not guarantee the accuracy regarding the completeness of the translation. You may also refer to the English Version of this knowledge base article for up-to-date information.