Veritas NetBackup™ Appliance Commands Reference Guide

Last Published:
Product(s): Appliances (5.0)
Platform: NetBackup Appliance OS
  1. Overview
    1.  
      About the NetBackup Appliance Shell Menu
    2. Logging in to the NetBackup Appliance Shell Menu
      1.  
        Command limitations on appliances that are not configured
    3.  
      Using the NetBackup Appliance Shell Menu
    4. About the NetBackup Appliance Shell Menu command views
      1.  
        About the commands under the Appliance view
      2.  
        About the commands under the Manage view
      3.  
        About the commands under the Monitor view
      4.  
        About the commands under the Network view
      5.  
        About the commands under the Reports view
      6.  
        About the commands under the Settings view
      7.  
        About the commands under the Support view
  2. Appendix A. Main > Appliance commands
    1.  
      Appliance > Primary
    2.  
      Appliance > Media
    3.  
      Appliance > Management
    4.  
      Appliance > Remove
    5.  
      Appliance > ShowDedupPassword
    6.  
      Appliance > ShowIdentity
    7.  
      Appliance > Status
  3. Appendix B. Main > Manage > FibreChannel commands
    1.  
      Manage > FibreChannel > Clean
    2.  
      Manage > FibreChannel > Configure
    3.  
      Manage > FibreChannel > Reset
    4.  
      Manage > FibreChannel > Scan
    5.  
      Manage > FibreChannel > Show
    6.  
      Manage > FibreChannel > Statistics
  4. Appendix C. Main > Manage > HighAvailability commands
    1.  
      Manage > HighAvailability > AddNode
    2.  
      Manage > HighAvailability > GetAssetTag
    3.  
      Manage > HighAvailability > RemoveNode
    4.  
      Manage > HighAvailability > Setup
    5.  
      Manage > HighAvailability > Status
    6.  
      Manage > HighAvailability > Switchover
  5. Appendix D. Main > Manage > Libraries commands
    1.  
      Manage > Libraries > Configure
    2.  
      Manage > Libraries > Deny
    3.  
      Manage > Libraries > Down
    4.  
      Manage > Libraries > Inventory
    5.  
      Manage > Libraries > List
    6.  
      Manage > Libraries > Requests
    7.  
      Manage > Libraries > Reset
    8.  
      Manage > Libraries > Resubmit
    9.  
      Manage > Libraries > Up
  6. Appendix E. Main > Manage > Libraries > Advanced > ACS commands
    1.  
      Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
    2.  
      Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
    3.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
    4.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
    5.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
    6.  
      Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
    7.  
      Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
    8.  
      Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
    9.  
      Manage > Libraries > Advanced > ACS > TestACS
    10.  
      Manage > Libraries > Advanced > ACS > ViewVMconf
  7. Appendix F. Main > Manage > License commands
    1.  
      Manage > License > Add
    2.  
      Manage > License > List
    3.  
      Manage > License > ListInfo
    4.  
      Manage > License > Remove
  8. Appendix G. Main > Manage > MountPoints commands
    1.  
      Manage > MountPoints > List
    2.  
      Manage > MountPoints > Mount
    3.  
      Manage > MountPoints > Unmount
  9. Appendix H. Main > Manage > NetBackup CLI commands
    1.  
      Manage > NetBackupCLI > Create
    2.  
      Manage > NetBackupCLI > Delete
    3.  
      Manage > NetBackupCLI > List
  10. Appendix I. Main > Manage > OpenStorage commands
    1.  
      Manage > OpenStorage > Install
    2.  
      Manage > OpenStorage > List
    3.  
      Manage > OpenStorage > Readme
    4.  
      Manage > OpenStorage > Share
    5.  
      Manage > OpenStorage > Uninstall
  11. Appendix J. Main > Manage > Software commands
    1.  
      Manage > Software > Cancel
    2.  
      Manage > Software > Delete
    3.  
      Manage > Software > Download
    4.  
      Manage > Software > DownloadAnalyzer
    5.  
      Manage > Software > DownloadProgress
    6.  
      Manage > Software > Firmware
    7.  
      Manage > Software > Install
    8.  
      Manage > Software > List
    9.  
      Manage > Software > Readme
    10.  
      Manage > Software > Rollback
    11.  
      Manage > Software > Share
    12.  
      Manage > Software > UpgradeStatus
    13.  
      Manage > Software > VxUpdate
  12. Appendix K. Main > Manage > Storage commands
    1.  
      Manage > Storage > Add
    2.  
      Manage > Storage > Create
    3.  
      Manage > Storage > Delete
    4.  
      Manage > Storage > Edit
    5.  
      Manage > Storage > Monitor
    6.  
      Manage > Storage > Move
    7.  
      Manage > Storage > Remove
    8.  
      Manage > Storage > Resize
    9.  
      Manage > Storage > Scan
    10.  
      Manage > Storage > Show
    11.  
      Manage > Storage > Erase
  13. Appendix L. Main > Manage > Tapes commands
    1.  
      Manage > Tapes > Cleaning
    2.  
      Manage > Tapes > Delete
    3.  
      Manage > Tapes > Eject
    4.  
      Manage > Tapes > Freeze
    5.  
      Manage > Tapes > Inventory
    6.  
      Manage > Tapes > List
    7.  
      Manage > Tapes > ListNetBackupMedia
    8.  
      Manage > Tapes > Suspend
    9.  
      Manage > Tapes > Unfreeze
    10.  
      Manage > Tapes > Unsuspend
  14. Appendix M. Main > Monitor commands
    1.  
      Monitor > Beacon
    2.  
      Monitor > MemoryStatus
    3.  
      Monitor > NetBackup
    4.  
      Monitor > NetworkStatus
    5.  
      Monitor > SDCS
    6.  
      Monitor > Top
    7.  
      Monitor > Uptime
    8.  
      Monitor > Who
    9.  
      Monitor > Hardware
  15. Appendix N. Main > Network commands
    1.  
      Network > Configure
    2.  
      Network > Date
    3.  
      Network > DNS
    4.  
      Network > Gateway
    5.  
      Network > Hostname
    6.  
      Network > Hosts
    7.  
      Network > IPv4
    8.  
      Network > IPv6
    9.  
      Network > LinkAggregation
    10.  
      Network > NetStat
    11.  
      Network > NTPServer
    12.  
      Network > Ping
    13.  
      Network > SetProperty
    14.  
      Network > Show
    15.  
      Network > TimeZone
    16.  
      Network > TraceRoute
    17.  
      Network > Unconfigure
    18.  
      Network > VLAN
    19.  
      Network > WANOptimization
  16. Appendix O. Main > Network > Security commands (DeviceCert)
    1.  
      Network > Security > Export
    2.  
      Network > Security > Import
  17. Appendix P. Main > Reports commands
    1.  
      Reports > Deduplication
    2.  
      Reports > Process
  18. Appendix Q. Main > Settings commands
    1.  
      Settings > Deduplication
    2.  
      Settings > FibreTransport
    3.  
      Settings > iSCSI > Initiator
    4.  
      Settings > iSCSI > Interface
    5.  
      Settings > iSCSI > Target
    6.  
      Settings > LogForwarding
    7.  
      Settings > LifeCycle
    8.  
      Settings > NetBackup
    9.  
      Settings > NetBackup DNAT
    10.  
      Settings > NetBackup NATServers
    11.  
      Settings > Password
    12.  
      Settings > Share
    13.  
      Settings > SNMP
    14.  
      Settings > Sysctl
    15.  
      Settings > SystemLocale
  19. Appendix R. Main > Settings > Alerts commands
    1.  
      Settings > Alerts > CallHome
    2.  
      Settings > Alerts > Email
    3.  
      Settings > Alerts > Hardware
    4.  
      Settings > Alerts > SNMP
    5.  
      Settings > Alerts > Transmission
  20. Appendix S. Main > Settings > Notifications view commands
    1.  
      Settings > Notifications > LoginBanner
  21. Appendix T. Main > Settings > Security commands
    1.  
      Settings > Security > Authorization
    2.  
      Settings > Security > Authentication > AccountStatus
    3.  
      Settings > Security > Authentication > ActiveDirectory
    4.  
      Main > Settings > Security > Authentication > CIFSShare
    5.  
      Settings > Security > Authentication > Kerberos
    6.  
      Settings > Security > Authentication > LDAP
    7.  
      Settings > Security > Authentication > LocalUser
    8.  
      Settings > Security > Authentication > SmartCard
    9.  
      Main > Settings > Security > Certificate
    10.  
      Main > Settings > Security > Certificate > CertificateSigningRequest
    11.  
      Main > Settings > Security > FIPS
    12.  
      Main > Settings > Security > Ports
    13.  
      Main > Settings > Security > STIG
    14.  
      Main > Settings > Security > SecurityLevel
    15.  
      Main > Settings > Security > Sessions
  22. Appendix U. Main > Support commands
    1.  
      Support > Checkpoint
    2.  
      Support > Cleanup > CleanMonInvData
    3.  
      Support > Cleanup > RemoveShelfEntries
    4.  
      Support > Cleanup > ResetDIMMErrors
    5.  
      Support > Collect
    6.  
      Support > DataCollect
    7.  
      Support > Disk
    8.  
      Support > Errors
    9.  
      Support > FactoryReset
    10.  
      Support > FibreTransport
    11.  
      Support > ImportISO
    12.  
      Support > InfraServices
    13.  
      Support > InstantAccess
    14.  
      Support > iostat
    15.  
      Support > IPMI
    16.  
      Support > KillRemoteCall
    17.  
      Support > LogBrowser
    18.  
      Support > Logs
    19.  
      Support > Maintenance
    20.  
      Support > Messages
    21.  
      Support > NBDNA
    22.  
      Support > nbperfchk
    23.  
      Support > NBSU
    24.  
      Support > Processes
    25.  
      Support > RAID
    26.  
      Support > Reboot
    27.  
      Support > RecoverStorage
    28.  
      Support > Service
    29.  
      Support > ServiceAllowed
    30.  
      Support > ShelfOrdering
    31.  
      Support > Show
    32.  
      Support > Shutdown
    33.  
      Support > Storage ClearReservations
    34.  
      Support > Storage Reset
    35.  
      Support > Storage SanityCheck
    36.  
      Support > Storage Show
    37.  
      Support > System
    38.  
      Support > Test
  23. Appendix V. CLISH menu for NetBackupCLI user
    1.  
      Command
    2.  
      Password

Name

Main > Monitor > SDCS — Configure and monitor Symantec Data Center Security (SDCS).

SYNOPSIS

Audit

ServerInfo

DESCRIPTION

Use this command to monitor Symantec Data Center Security (SDCS) events and configuration on the appliance.

OPTIONS

The following commands and options are available under Monitor > SDCS:

Audit

Search, filter, and edit the retention settings of the SDCS audit log.

  • Use the Audit Search <search_string> command to search the audit log for the specified string. Use quotation marks if your search string contains multiple words.

  • Use the Audit SetSettings FileNumber <file_number> command to set the number of SDCS audit files that are maintained.

  • Use the Audit SetSettings RetentionPeriod <days> command to set the number of days that the audit files are maintained.

  • Use the Audit ShowSettings command to view the retention period (days) of the audit files.

  • Use the Audit View command and options to filter and display the audit log based on available criteria.

    • Audit View Date <ToDate> [FromDate]

      View audit records using the FromDate to ToDate parameters. The format is mm/dd/yyyy[-hh:mm:ss]. If FromDate is omitted, it equals ToDate with hh:mm:ss set to zeroes.

    • Audit View EventID <ID#>

      Retrieve the detailed view of the audit record that contains the given event ID.

    • Audit View EventType <event_code>

      Retrieve the audit records that match the given event type. Each event type is represented by a four-letter code that appears in the SDCS audit log. You can view the available codes using the Audit View EventTypeCodes command.

    • Audit View EventTypeCodes

      Display the event type codes that can be used with the Audit View EventType command, along with a brief description of each code.

    • Audit View Filter <criteria>

      View the audit records that match the filter criteria.

    • Audit View Severity <severity_code>

      Retrieve the audit records that match the given severity. Each event is represented by a one-letter code that appears in the SDCS audit log. You can view the available codes using the Audit View SeverityCodes command.

    • Audit View SeverityCodes

      Display the severity codes that can be used with the Audit View Severity command, along with a brief description of each code.

ServerInfo

Set and display SDCS server information to make the appliance a managed agent.

  • Use the ServerInfo GetServerCert <hostname> <port> command to get an SDCS server certificate. The <hostname> parameter is the fully qualified domain name of the SDCS server. The port is the port number of the SDCS server. The default port is 443.

  • Use the SDCS > ServerInfo Set command to define the SDCS server information to make the appliance a managed agent.

  • Use the SDCS > ServerInfo Show command to display the SDCS management server configuration.