NetBackup™ Web UI Red Hat Virtualization Administrator's Guide

Last Published:
Product(s): NetBackup (10.3.0.1, 10.2)
  1. Managing Red Hat Virtualization servers
    1.  
      Upgrading to NetBackup 10.3
    2.  
      Quick configuration checklist to protect Red Hat Virtualization virtual machines
    3. Configuring secure communication between the Red Hat Virtualization server and NetBackup host
      1.  
        ECA_TRUST_STORE_PATH for NetBackup servers and clients
      2.  
        ECA_CRL_PATH for NetBackup servers and clients
      3.  
        VIRTUALIZATION_HOSTS_SECURE_CONNECT_ENABLED for servers and clients
      4.  
        VIRTUALIZATION_CRL_CHECK for NetBackup servers and clients
    4.  
      About the ports that NetBackup uses to communicate with Red Hat Virtualization
    5. Add or browse an Red Hat Virtualization manager
      1.  
        Adding a backup host to the NetBackup primary server
      2.  
        Remove an Red Hat Virtualization manager
    6.  
      Configure autodiscovery of the Red Hat Virtualization virtual machines
    7.  
      Create an intelligent VM group
    8.  
      Remove an intelligent VM group
    9.  
      Setting global limits on the use of Red Hat Virtualization resources
  2. Protecting RHV virtual machines
    1.  
      Things to know before you protect Red Hat Virtualization virtual machines
    2.  
      Protect Red Hat Virtualization VMs or intelligent VM groups
    3. Customize protection settings for a RHV asset
      1.  
        Schedules
      2.  
        Backup options
    4.  
      Remove protection from VMs or intelligent VM groups
    5.  
      View the protection status of VMs or intelligent VM groups
  3. Recovering RHV virtual machines
    1.  
      Things to consider before you recover the Red Hat Virtualization virtual machines
    2.  
      About the pre-recovery check
    3.  
      Recover an Red Hat Virtualization virtual machine
    4.  
      About the supported virtual disk formats and disk provisioning during VM recovery
  4. Troubleshooting RHV VM protection and recovery
    1.  
      Troubleshooting tips for NetBackup for Red Hat Virtualization
    2.  
      Error during the Red Hat Virtualization virtual machines discovery phase
    3.  
      Error run into while backing up Red Hat Virtualization virtual machines
    4.  
      Error while restoring Red Hat Virtualization virtual machines
  5. API and command line options for RHV
    1. Using APIs and command line options to manage, protect, or recover RHV VMs
      1.  
        Additional information about the rename file
    2. Additional NetBackup options for Red Hat Virtualization configuration
      1.  
        OVIRT_IMAGEIO_INACTIVITY_TIMEOUT option for NetBackup servers
      2.  
        RHV_CREATEDISK_TIMEOUT option for NetBackup servers
      3.  
        RHV_AUTODISCOVERY_INTERVAL option for NetBackup servers

VIRTUALIZATION_HOSTS_SECURE_CONNECT_ENABLED for servers and clients

The VIRTUALIZATION_HOSTS_SECURE_CONNECT_ENABLED option enables the validation of virtualization server certificates using its root or intermediate certificate authority (CA) certificates.

Before you enable the option, review the steps from the 'Validating VMware virtualization server certificates in NetBackup ' section in the NetBackup for VMware Administrator's Guide.

By default, the VIRTUALIZATION_HOSTS_SECURE_CONNECT_ENABLED option is set to UNDEFINED.

The security certificate validation is enabled for Red Hat Virtualization and Nutanix AHV servers, but is disabled for VMware servers.

Note:

In a scenario where an external CA can be configured for one virtualization server, but not for the other, two separate backup hosts must be used. The VIRTUALIZATION_HOSTS_SECURE_CONNECT_ENABLED option must be set to YES for the backup host where the external CA can be configured. The VIRTUALIZATION_HOSTS_SECURE_CONNECT_ENABLED must be set to YESfor the backup host where the external CA can be configured. The option must be set to NO for the other backup host.

Table: VIRTUALIZATION_HOSTS_SECURE_CONNECT_ENABLED information

Usage

Description

Where to use

On NetBackup primary server or all access hosts.

How to use

Use the nbgetconfig and the nbsetconfig commands to view, add, or change the option.

For information about these commands, see the NetBackup Commands Reference Guide.

Use the following format to enable certificate validation for the Red Hat Virtualization, VMware, or Nutanix AHV servers:

VIRTUALIZATION_HOSTS_SECURE_CONNECT_ENABLED = YES

Equivalent NetBackup web UI property

No equivalent exists.